CP-C.1 24/20.0 Power Supply

The CP-C.1 24/20.0 is a switch-mode power supply offering a wide input range and adjustable output voltage, ideal for a variety of industrial applications. It features high efficiency, power factor correction, and support for parallel operation for redundancy and increased capacity.

Key Features:

• Switch-mode power supply for reliable and efficient operation
• Wide input voltage range: 85–264 V AC and 90–300 V DC
• Rated input voltage: 100–240 V AC, 90–300 V DC
• Adjustable output voltage: 22.5 to 28.5 V DC
• Rated output voltage: 24 V DC
• Rated output current: 20 A
• Output power: 480 W
• U/I characteristic curve with up to 30% power reserve
• Redundancy support through parallel operation
• Power factor correction (according to EN 61000-3-2)
• Buffer modules and redundancy units available as accessories

Electrical Specifications:

• Input voltage: 85–264 V AC, 90–300 V DC
• Rated output current:
  • -25°C to +40°C: 26 A
  • -25°C to +60°C: 20 A
• Rated output power: 480 W
• Output current maximum: 26 A
• Hold-up time: Min. 40 ms at 230 V AC
• Typical input current:
  • (115 V AC): 4.6 A
  • (230 V AC): 2.3 A
• Rated frequency: 50/60 Hz
• Frequency limits: 45–65 Hz

Input/Output Circuit Characteristics:

• Rated impulse withstand voltage:
  • Input Circuit: 4 kV
  • Output Circuit: 4 kV
• Rated insulation voltage:
  • Input/output circuit: 300 V
  • Input circuit/PE: 300 V
  • Output circuit/PE: 50 V
• Degree of protection:
  • Housing: IP20
  • Terminals: IP20
• Pollution degree: 2

Mechanical Specifications:

• Mounting type: DIN rail (TH35-15 or TH35-7.5)
• Mounting position: Position 1, 7
• Minimum mounting distance:
  • Electrical conductive board (horizontal/vertical): 25 mm
  • Same type device (horizontal/vertical): 25 mm
• Dimensions:
  • Width: 82 mm
  • Height: 129.4 mm
  • Depth/Length: 136 mm
• Weight: 1.57 kg

Environmental Specifications:

• Ambient air temperature:
  • Operation: -25°C to +70°C
  • Storage: -40°C to +85°C
• Vibration resistance (IEC 60068-2-6):
  • 10–58 Hz: ±0.15 mm
  • 58–150 Hz: 2g, 10 sweep cycles each axis
• Shock resistance (IEC 60068-2-27): 30g / 3 shocks / 6 ms
• Damp heat resistance (IEC 60068-2-30): Test Db at 55°C, 2 cycles
• RoHS compliance: Follows EU Directive 2011/65/EU