Overview

The 3300 XL 8 mm Proximity Transducer System consists of the following components:

• One 3300 XL 8 mm probe
• One 3300 XL extension cable
• One 3300 XL Proximitor Sensor

Key Features:

• The 3300 XL Proximitor Sensor incorporates several improvements over previous designs.
• It features a compact packaging design that supports high-density DIN-rail installations.
• It can also be mounted in a traditional panel mount configuration, sharing the same 4-hole mounting "footprint" as older Proximitor Sensor models.
• The mounting base provides electrical isolation, eliminating the need for separate isolator plates.
• Enhanced immunity to radio frequency interference (RFI) allows installation in fiberglass housings without adverse effects from nearby RFI.
• The RFI/EMI immunity satisfies European CE mark approvals, eliminating the need for special shielded conduit or metallic housings, thereby reducing installation costs and complexity.

Specifications

• Proximitor Sensor Input: Accepts one non-contacting 3300-series 5 mm or 3300 XL 8 mm Proximity Probe and Extension Cable.

• Power Requirements:

  • -17.5 Vdc to -26 Vdc when installed with non-incendive circuit connected (per installation drawing 140979) at 12 mA maximum consumption.
  • -23 Vdc to -26 Vdc with barriers.
  • Operation at voltages more positive than -23.5 Vdc may result in reduced linear range.

• Supply Sensitivity: Less than 2 mV change in output voltage per volt change in input voltage.

• Output Resistance: 50 Ω

• Material: A308 aluminum

• Weight: 246 g (8.67 oz)

• Operating Temperature: -52°C to +100°C (-62°F to +212°F)

• Storage Temperature: -52°C to +105°C (-62°F to +221°F)