Overview: Assembly Kit B 9361

This assembly kit is used to provide an additional 5 V power supply for Systems H51q, especially when the power supply modules built into the central rack are insufficient for the 5 V circuits.

---

Parts of Assembly Kit B 9361:

• 1 x K 1408 Central Rack

  • 5 units high, 19-inch rack
  • Integrated cable tray

• Additional Modules on the Rear

  • 3 x Z 6011

    • Decoupling and fusing to feed the power supply modules

  • 1 x Z 6012

    • Fan with fan run monitoring and fuse monitoring

  • 2 x Z 6013

    • Decoupling and fusing of the supply voltage for Z 6012

---

Modules Included:

• 1 x F 7126 Power Supply Module (PS1)

  • 24 V / 5 V, 10 A

• 1 x F 7131 Power Supply Monitoring

• 14 x Socket Connectors

  • 32-pole, HIMA Part No. 52 0032465
  • For installation of standard (F-) modules from the HIMA Planar System.

---

Optional Modules (Separate Order):

• 2 x F 7126 Power Supply Modules (PS2, PS3)

  • 24 V / 5 V
  • The 5 V outputs of the power supply modules are switched in parallel.

• 1 ... 14 x Standard (F-) Modules

  • From the HIMA Planar System.

---

Additional Power Supply:

• Loadable up to 18 A

  • The additional power supply is used if the power supply modules built into the central rack are insufficient for the 5 V circuits (i.e., if the current exceeds 18 A with 3 F 7126 power supply modules in a redundant control setup).

  • For accurate current consumption, refer to the corresponding data sheets for each module.

• Important Note:

  • The 5 V circuits of the power supply modules in both the central rack and the additional power supply should not be switched in parallel.
  • The GND of both power supplies must be connected together.
  • Availability is ensured because 2 of the 3 power supply modules can guarantee the 5 V supply.