Overview

The Honeywell CC-PAIM01 is a Low Level Analog (Temperature) Input module designed for use within Honeywell Experion Process Knowledge System (PKS) controllers. It supports multiple thermocouple and RTD types, providing accurate temperature measurements across various applications.

Technical Specifications

• Manufacturer: Honeywell
• Product Number: CC-PAIM01
• Product Type: Low Level Analog Input
• Input Channels: 64 fully-isolated channel-to-channel, channel-to-PM, and channel-to-power supply common in 16 channel increments
• Input Scan Rate: 1 Second fixed by IOM (up to 64 channels/sec max.)
• Channel Bandwidth: 0 to 4.7 Hz (-3 dB)
• Nominal Input Range (TC only): -20 to +100 millivolts
• Maximum Normal Mode Continuous Input Non-Damaging:
  • Thermocouple: -10 to +10 volts
  • RTD: -1 to +2 Volts @ 100 milliamps
• Gain Error (-20 to +100 millivolt range): 0.050% full scale max
• Temperature Stability:
  • TC, millivolt inputs: +/-20 ppm per deg C max
  • RTD inputs: +/-20 ppm per deg C max
• Long Term Drift: 500 ppm
• Input Impedance: 1 megohm at dc (TC only)
• Common Mode Voltage (CMV): +/-250 VDC or VAC RMS
• Common Mode Rejection Ratio (CMRR): 120 dB min (50 or 60 Hz with 1000 ohms source impedance max)
• Voltage, Channel-to-Channel, DC to 60 Hz: +/-250 VDC or VAC RMS
• Crosstalk, DC to 60 Hz: 80 dB (120 dB at 50 and 60 Hz)
• NMRR at 50/60 Hz: 60 dB min
• Line Frequency Integration: Fixed selection of 50 Hz or 60 Hz
• RTD Sensor Excitation Current: 1 milliamp
• Cold Junction Reference (CJR) Accuracy:
  • 0 to +50 deg C: +/-1.0 deg C Max
  • -20 to +60 deg C: +/-1.5 deg C Max
• TC Linearization Accuracy: 2 ± 0.05 Ω / deg C
• Open Thermocouple Detection: Each conversion qualified, ≤ 1000 Ω = guaranteed no-trip, ≥ 1500 Ω guaranteed trip
• RTD Max Lead Resistance: 15 Ω
• Surge Protection (Sensor Terminals): EN 61000-4-5 (1kV line to line, 2kV line to ground for industrial locations)
• Maximum Cable Distance IOTA to FTA Using Cable Adapter: 1000 feet 16 gauge wire, two twisted pair per FTA
• Supported RTD Types:
  • Pt: 100 ohm DIN 4376 -180 to +800 deg C
  • Pt: 100 ohm JIS C-1604 -180 to +650 deg C
  • Ni: 120 ohm ED #7 -45 to +315 deg C
  • Cu: 10 ohm SEER -20 to +250 deg C
• Supported Thermocouple Types:
  • ANSI J: -200 to +1200 deg C
  • ANSI K: -100 to +1370 deg C
  • ANSI E: -200 to +1000 deg C
  • ANSI T: -230 to +400 deg C
  • ANSI B: +100 to +1820 deg C
  • ANSI S: 0 to +1700 deg C
  • ANSI R: 0 to +1700 deg C
  • JAPAN TYPE R’: 0 to +1770 deg C
• Supported Millivolt Types: -20 to +100 millivolts
• FTA Dimensions: 12.5 D x 4.9 W x 12.1 L (inches) or 63.5 D x 124.46 W x 307.34 L (millimeters)