Overview

The C200 has been available since the initial release of Experion. This control processor is mounted into a standard Series-A chassis assembly, occupying two physical slots. The chassis-A power supply provides power for all modules in the chassis.

The C200 can be configured in either a single or fully redundant setup. In a redundant configuration, two C200 processors are mounted into separate chassis assemblies with identical module complements. Each chassis contains a Redundancy Module (RM) to manage synchronization and automatic switchover between the primary and backup C200 processors. Data synchronization between the two C200 units is continuous, facilitated by a fiber-optic cable connecting the RMs.

The C200’s memory is loaded with the Control Execution Environment (CEE), which serves as the execution platform for a comprehensive set of automatic control, logic, data acquisition, and calculation function blocks. These are configured using Honeywell’s Control Builder, a graphical configuration tool. Control Builder allows users to create and download control strategies to the C200 processor and configure all connected hardware, including I/O modules and gateways to smart serial networks.

Features:

• Chassis-Based Controller with Plug-In Modules for Control Processor
• I/O Link Interface
• Redundancy
• FTE Interface
• Fieldbus
• Other I/O and Control Modules

Specifications

• Pressure Range: 0 to 1000 PSI (adjustable based on specific model configurations)
• Accuracy: ±0.1% of full scale
• Output Signal: 4-20 mA or 0-10 VDC (configurable)
• Operating Temperature: -40°C to +85°C
• Electrical Connection: M12 connector or cable gland
• Housing Material: Stainless steel
• Protection Rating: IP67 for protection against dust and water immersion
• Response Time: <1 ms
• Power Supply: 10 to 30 VDC