{"product_id":"is200vnh1b-general-electric-terminal-board-new-original-stock","title":"IS200VNH1B General Electric Terminal Board | New \u0026 Original Stock","description":"\u003cp\u003eaThe \u003cstrong\u003eGeneral Electric IS200VNH1B\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200VNH1\u003c\/strong\u003e Terminal Board, operates as a dedicated hardware component for signal termination and input\/output distribution within Mark VI turbine control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200VNH1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e33 cm x 11 cm x 5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive (Loop Powered)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type\u003c\/td\u003e\n\u003ctd\u003ePanel Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eI\/O Signal Termination\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS200VNH1B serves as a physical interface for distributing analog and digital signals between field-side sensors and the rack-mounted I\/O processor. As a passive termination component, it ensures that electrical signals are routed to the controller with high signal fidelity, maintaining the deterministic requirements of the turbine control loop. The board geometry and connector layout are optimized for high-density wiring environments, facilitating consistent signal transmission while mitigating crosstalk between adjacent I\/O channels. Firmware flash compatibility is not applicable to this passive terminal board, as its operation is determined by the physical pathing and the configuration of the associated I\/O pack.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the IS200VNH1B module compatible with legacy VNH1 versions?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the board is generally forward and backward compatible within the VNH1 series. However, always cross-reference the physical pin mapping with the cabinet-specific elementary diagrams to ensure compatibility with existing cable harnesses.\u003c\/p\u003e\n\u003cp\u003eQ: Does this board support hot-swapping?\u003c\/p\u003e\n\u003cp\u003eA: No. Power to the associated I\/O loop must be isolated prior to removing or installing the board to prevent transient surges on the signal lines or damage to the backplane interface pins.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the control rack power supply is isolated before beginning installation.\u003c\/li\u003e\n\u003cli\u003eAlign the board with the mounting stand-offs in the cabinet and secure it using the appropriate fasteners to ensure proper electrical contact with the cabinet ground plane.\u003c\/li\u003e\n\u003cli\u003eTerminate field wiring according to the site-specific terminal block diagram. Ensure all shields are grounded at the designated chassis termination point.\u003c\/li\u003e\n\u003cli\u003eTorque screw terminals to the manufacturer-specified value to prevent wire loosening due to mechanical vibration.\u003c\/li\u003e\n\u003cli\u003eVerify signal loop continuity from the field termination point to the I\/O processor connector before restoring power to the system.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52462676246840,"sku":"IS200VNH1B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200TDBSH2A_IS200TDBSH2AAA.jpg?v=1780472877","url":"https:\/\/www.automodulexpert.com\/fa\/products\/is200vnh1b-general-electric-terminal-board-new-original-stock","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}