PLC Interface Module Yokogawa S2EN501-S00030

PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030

PLC Interface Module Yokogawa S2EN501-S00030

This S2EN501-S00030 PLC Interface Module was manufactured by YOKOGAWA, In Stock, 100% Guaranteed Brand New and Authentic. Link to More Information

 
Manufacturer:
YOKOGAWA
Part Number:
S2EN501-S00030
Product type:
Country of Origin:
Japan
Condition:
New With Original Package
Shipping Port:
ShangHai, Xiamen
Warranty:
12 Months
 

Product Description

The S2EN501-S00030 is a high-performance communication interface module engineered for integration with Yokogawa STARDOM and CENTUM series controllers. It functions as a critical networking bridge that enables synchronized data exchange within distributed control system (DCS) architectures.

Designed for high-availability industrial environments, the S2EN501-S00030 supports redundant network configurations, ensuring uninterrupted communication and preventing data loss during critical process operations. Its optimized hardware architecture enables low-latency communication between CPU units and remote I/O nodes, helping maintain stable control performance in complex automation systems.

With built-in diagnostic indicators and industrial-grade network protection, this module enhances system reliability while simplifying troubleshooting and maintenance in large-scale automation deployments.

Technical Specifications

Parameter Specification
Model Number S2EN501-S00030
Module Type Ethernet Communication / Interface Module
Protocol Support V net, Ethernet/IP, Modbus TCP/IP
Redundancy Support Dual-redundant configuration for fail-safe operation
Data Rate 10/100 Mbps auto-sensing high-speed transmission
Power Consumption Low-power industrial design (typically <0.5A at 5V DC)
Connectivity Dual RJ45 or dedicated bus interface connectors
Isolation Voltage 500V AC signal-to-ground isolation
Status Indicators LED diagnostics for Link, Activity, and Hardware Status
Operating Temperature -20°C to +70°C

Application Scenarios

The S2EN501-S00030 communication module is commonly deployed in industrial sectors where continuous operation and data reliability are critical, including power generation plants, water treatment facilities, petrochemical processing units, and large-scale manufacturing systems.

Within these environments, the module manages high-speed communication between central controllers and distributed field devices, enabling real-time monitoring, diagnostics, and control actions. It is particularly valuable when expanding existing Yokogawa PLC or DCS racks, allowing engineers to integrate modern Ethernet-based networking into established control infrastructures.

FAQ

Q: Does the S2EN501-S00030 require specific firmware versions for installation?
A: Yes. Compatibility depends on the controller’s current Revision (Rev) level and system firmware. It is recommended to verify that the system software version supports the module’s hardware revision to ensure full functionality.

Q: Is this module hot-swappable?
A: The S2EN501-S00030 supports redundant system configurations that allow maintenance with minimal system disruption. However, installation or removal should always follow the backplane safety procedures and system maintenance guidelines specified for the controller platform.

نقل قول‌های سریع قیمت و موجودی را سریع از تیم خدمات مشتری اختصاصی ما دریافت کنید.
تحویل ارسال سریع، حمل و نقل بار و ارسال بین‌المللی موجود است.
شرایط 100٪ نو با بسته‌بندی اصلی
پرداخت ما American Express، Discover، MasterCard، PayPal و Visa را قبول می‌کنیم. سایت ما توسط RapidSSL ایمن شده است.
بندر حمل و نقل شانگهای، شیامن
گارانتی 12 ماه
Q: آیا قیمت‌گذاری ما رقابتی است؟
A: بله، ما با بیش از ۵۰ کشور در سراسر جهان همکاری می‌کنیم. به عنوان یکی از تامین‌کنندگان برتر در چین، تخفیف‌های قابل توجهی بر اساس روند بازار ارائه می‌دهیم.
Q: دوره گارانتی چقدر است؟
A: تمام محصولات جدید و اصلی ما دارای گارانتی استاندارد یک ساله هستند.
Q: چه روش‌های پرداختی را قبول داریم؟
A: ما قبل از ارسال کالا، پرداخت ۱۰۰٪ T/T (انتقال تلگرافی) را می‌طلبیم. برای اقلامی که زمان تولید دارند، ۳۰٪ پیش‌پرداخت لازم است و ۷۰٪ باقی‌مانده قبل از ارسال باید پرداخت شود. اگر نماینده‌ای در چین دارید، می‌توانید انتقال RMB را از طریق او انجام دهید.
Q: از چه روش‌های حمل و نقلی استفاده می‌کنیم؟
A: ما عمدتاً از FedEx، DHL، UPS و BRE برای حمل و نقل استفاده می‌کنیم. اگر حساب کاربری در هر یک از این شرکت‌ها دارید، می‌توانید حمل و نقل را مستقیماً انجام دهید. همچنین ارسال رایگان به فورواردهای حمل و نقل مستقر در چین ارائه می‌دهیم.
Q: زمان تحویل ما چقدر است؟
A: تحویل معمولاً ۱ تا ۳ روز پس از دریافت پرداخت اولیه انجام می‌شود. برای اقلامی که زمان تولید دارند، حمل و نقل طبق برنامه مشخص شده انجام خواهد شد.
Q: چگونه کالاها را بسته‌بندی می‌کنیم؟
A: ما بسته‌بندی ایمن را با چندین لایه محافظت تضمین می‌کنیم. محصولات ابتدا در جعبه‌های اصلی خود قرار گرفته و با برچسب مهر و موم می‌شوند. سپس یک لایه حباب‌دار برای محافظت در برابر ضربه در حین حمل اضافه می‌شود. در نهایت، اقلام به‌طور ایمن در جعبه‌های مقاوم بسته‌بندی می‌شوند.
Q: مشتریان چگونه می‌توانند با ما تماس بگیرند و درخواست قیمت کنند؟
A: شما می‌توانید از طریق ایمیل، واتساپ، وی‌چت، اسکایپ یا پلتفرم ارتباطی مورد علاقه‌تان با ما تماس بگیرید. نیازهای خود را با ما در میان بگذارید و ما یک پیشنهاد قیمت سریع و سفارشی ارائه خواهیم داد.
 

اخیراً مشاهده شده‌ها

Express Shipping icon
ارسال سریع
تحویل سریع برای نیازهای فوری شما.
Large stock icon
موجودی گسترده
موجودی زیاد برای ارسال فوری.
Quality Assurance Icon
تضمین کیفیت
قطعات اصلی و درجه یک PLC و DCS.
Global Service icon
خدمات جهانی
پشتیبانی از مشتریان در سراسر جهان با خدمات قابل اعتماد.