Overview

The GE FANUC IC698PSA100 is a reliable power supply designed for the PACSystems RX7i. This power supply unit features multiple output voltages and operates efficiently across a wide input voltage range.

Features

• Wide Input Voltage Range: Operates from 85 to 264 VAC and 100-150 VDC.
• Multiple Output Voltages:
  • +5 VDC: Up to 20 amps.
  • +12 VDC: Up to 2 amps.
  • –12 VDC: Up to 1 amp.

Specifications

• Construction: Slide-in rack mount using PICMG 2.11 standard connector.
• Protection:
  • Electronic short circuit and overcurrent protection.
  • Overvoltage and overtemperature fault protection.
• Power Factor: 0.99 minimum (valid between 90VAC and 260VAC).

Input Requirements

• Nominal Rated Voltage: 120/240 VAC, 125 VDC.
• Input Voltage Range: 85 to 264 VAC, 47 to 63 Hz, 100-150 VDC.
• Input Power:
  • 100W Supply:
    • Typical: 125 watts
    • Maximum: 150 watts.
  • 350W Supply:
    • Typical: 440 watts
    • Maximum: 500 watts.
• Inrush Current:
  • 100W Supply:
    • 15 amps (115VAC), 30 amps (230VAC).
  • 350W Supply:
    • 30 amps (115VAC), 60 amps (230VAC).

Output Requirements

• 100W Supply:
  • Output Power: Maximum 100 watts (total for all 3 outputs).
  • Output Voltage:
    • +5 VDC: 4.875 to 5.25 volts, 0–20 amps.
    • +12 VDC: 11.64 to 12.6 volts, 0–2 amps.
    • –12 VDC: –12.60 to –11.64 volts, 0–1 amp.
• 350W Supply:
  • Output Power: Maximum 350 watts (total for all 3 outputs).
  • Output Voltage:
    • +5 VDC: 4.875 to 5.25 volts, 0–60 amps.
    • +12 VDC: 11.64 to 12.6 volts, 0–12 amps.
    • –12 VDC: –12.6 to –11.64 volts, 0–4 amps.
• Isolation: Input to all outputs 1500 VDC.

Protective Limits

• Overvoltage Limit:
  • +5 VDC Output: 5.7 to 6.7 volts.
• Overcurrent Limit:
  • +5 VDC: 21A (typical 100W); 66A (typical 350W).
  • +12 VDC: 2.5A (typical 100W); 15A (typical 350W).
  • –12 VDC: 3.5A (typical 100W); 4.6A (typical 350W).

Performance Characteristics

• Ride-Through Time: 15 milliseconds minimum for loss of AC input without affecting DC outputs.
• Holdup Time: 5 milliseconds minimum from ACFAIL# signal activation to when any DC output drops out of specification.
• Operating Temperature:
  • 100W Supply: 0°C to 60°C (32°F to 140°F).
  • 350W Supply: 0°C to 60°C (32°F to 140°F; fan tray attachment required for full capacity).