IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock

IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock
IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock
IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock
IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock
IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock
IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock

IC200MDL241J GE Fanuc Discrete Input Module | New & Original Stock

This IC200MDL241J Discrete Input Module was manufactured by GE FANUC, In Stock, 100% Guaranteed Brand New and Authentic. Link to More Information

 
Manufacturer:
GE FANUC
Part Number:
IC200MDL241J
Vrsta proizvoda:
Country of Origin:
USA
Condition:
New With Original Package
Shipping Port:
ShangHai, Xiamen
Warranty:
12 Months
 

Configured for discrete signal acquisition in Versamax control networks, the GE Fanuc IC200MDL241J (IC200MDL241J Discrete Input Module) provides direct physical/electrical execution. This hardware component processes field input states and interfaces them directly with the system backplane for logic controller evaluation.

Hardware Specifications

Parameter Specification
Model IC200MDL241J
Brand GE Fanuc Emerson
Origin Refer to device label
Weight 0.63 lbs (0.28 kg)
Dimensions Standard Versamax module footprint
Operating Temp 0 to 60 deg C
Power Consumption 5 VDC backplane current consumption
Signal Type Discrete Input

Profinet / EtherNet/IP Deterministic Networks

The IC200MDL241J module maintains data integrity through deterministic backplane communication when integrated into the Versamax platform. The module cycle time is synchronized with the CPU scan rate to ensure I/O state changes are captured within the defined system latency parameters. Users must ensure that the firmware revision level of the module is compatible with the existing backplane interface module to maintain deterministic data transmission.

Frequently Asked Questions

Q: Does this module support hot-swap capabilities during system operation?

A: Yes, the IC200MDL241J supports hot-swapping within the Versamax system, allowing for module replacement without requiring a full power cycle of the backplane or CPU.

Q: How is the backplane current load calculated for this module?

A: The module draws power directly from the 5 VDC backplane bus. Users should verify that the total power supply capacity of the rack is not exceeded when multiple I/O modules are installed.

Field Installation Guidelines

  • Ensure the DIN rail is properly grounded to the cabinet chassis to minimize electrical interference.
  • Verify that the mechanical latch on the carrier is fully engaged before applying field power to the terminal block.
  • Observe standard wire stripping lengths; ensure all connections to the terminal block are torqued according to local electrical codes to prevent terminal overheating.
  • Maintain physical separation between high-voltage AC cabling and the low-voltage DC discrete signal wires to mitigate electromagnetic induction.
  • Verify that the input voltage levels applied to the terminals correspond to the rated voltage specification of the specific module variant to avoid internal circuit damage.
Brze ponude Primite cijenu i dostupnost BRZO od našeg posvećenog tima za korisničku podršku.
Dostava Dostupna je ubrzana, teretna i međunarodna dostava.
Stanje 100% Novo s originalnom ambalažom
Plaćanje Prihvaćamo American Express, Discover, MasterCard, PayPal i Visa. Naša stranica je osigurana RapidSSL-om.
Luka za otpremu ShangHai, Xiamen
Jamstvo 12 mjeseci
Q: Jesu li naše cijene konkurentne?
A: Da, surađujemo s više od 50 zemalja širom svijeta. Kao vodeći dobavljač u Kini, nudimo značajne popuste temeljem tržišnih trendova.
Q: Koje je jamstveno razdoblje?
A: Svi naši novi i originalni proizvodi dolaze sa standardnim jamstvom od jedne godine.
Q: Koje metode plaćanja prihvaćamo?
A: Zahtijevamo 100% T/T (telegrafski transfer) uplatu prije otpreme. Za artikle s rokom isporuke, potrebno je unaprijed uplatiti 30% depozita, a preostalih 70% prije otpreme. Ako imate predstavnika u Kini, možete preko njega dogovoriti prijenos RMB.
Q: Koje metode dostave koristimo?
A: Uglavnom koristimo FedEx, DHL, UPS i BRE za dostavu. Ako imate račun kod bilo kojeg od ovih prijevoznika, možete sami obaviti otpremu. Također nudimo besplatnu dostavu za špeditere sa sjedištem u Kini.
Q: Koje je naše vrijeme isporuke?
A: Dostava obično traje 1-3 dana nakon primitka početne uplate. Za artikle s rokom isporuke, otprema će se izvršiti prema navedenom rasporedu.
Q: Kako pakiramo robu?
A: Osiguravamo sigurno pakiranje s višestrukim slojevima zaštite. Proizvodi se prvo stavljaju u njihove originalne kutije i zatvaraju naljepnicama. Zatim se dodaje sloj mjehurićaste folije za zaštitu od udaraca tijekom transporta. Na kraju, predmeti se sigurno pakuju u čvrste kutije.
Q: Kako nas kupci mogu kontaktirati i zatražiti ponudu?
A: Možete nas kontaktirati putem e-pošte, WhatsAppa, WeChata, Skypea ili vaše omiljene komunikacijske platforme. Obratite nam se sa svojim potrebama, a mi ćemo vam pružiti brzu, prilagođenu ponudu.
 

Nedavno pregledano

Express Shipping icon
Ekspresna dostava
Brza dostava za vaše hitne zahtjeve.
Large stock icon
Opsežan inventar
Veliki lager za trenutnu dostavu.
Quality Assurance Icon
Osiguranje kvalitete
Autentične, vrhunske PLC i DCS komponente.
Global Service icon
Globalna usluga
Podrška klijentima širom svijeta pouzdanom uslugom.