The General Electric IS200EDISG1A, also cataloged as the IS200EDISG1 Exciter Power Distribution Board, operates as a dedicated hardware component for power regulation and distribution within EX2100e excitation control systems. This board serves as the critical junction for distributing controlled DC power to the excitation bridge and associated control circuitry.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | IS200EDISG1A |
| Brand | General Electric |
| Origin | USA |
| Weight | 0.8 kg |
| Dimensions | 33 x 10 x 8 cm |
| Operating Temp | 0 to 60 deg C |
| Power Consumption | 20 W |
| System Compatibility | EX2100e Exciter |
Backplane Bus Communication and Firmware Compatibility
The IS200EDISG1A facilitates system-wide power management through a complex array of distribution traces and protective monitoring circuits. It interfaces with the excitation backplane bus communication velocity to ensure that power-on status and fault conditions are accurately reported to the system controller. Firmware flash compatibility is intrinsically linked to the revision of the excitation control power supply and monitoring logic; improper firmware alignment can cause erroneous voltage regulation feedback, leading the controller to inhibit field excitation for protective purposes.
Frequently Asked Questions
Q: Does the IS200EDISG1A require manual adjustment for voltage distribution?
A: No, the board is designed with fixed distribution logic. Voltage thresholds and monitoring parameters are handled by the associated EX2100e controller software. Manual adjustments to the physical board are restricted to cable seating and diagnostic test point monitoring.
Q: Can this board be replaced during excitation operation?
A: Replacement of the IS200EDISG1A requires the excitation system to be in a total "Off" or "Maintenance" state. Because this board manages high-energy field power distribution, attempting replacement while the exciter is online will cause an immediate loss of field voltage and a potential turbine trip.
Field Installation Guidelines
- Mounting Stability: Secure the board using all available mounting points on the Exciter Power Distribution rack. Ensure that the backplane connectors are perfectly aligned before pressing the board into place to prevent pin bending.
- Power Connection: Verify that all high-current lug connections are tightened to the specified torque requirements to prevent localized overheating due to contact resistance.
- Grounding: Ensure the board chassis ground connection is securely bonded to the main cabinet ground bus. This is essential for maintaining a stable potential reference for the board's onboard voltage sensors.
- Cable Routing: Keep low-voltage control signals physically isolated from the high-power DC distribution lines to prevent capacitive coupling and induced signal noise.
| Brze ponude | Primite cijenu i dostupnost BRZO od našeg posvećenog tima za korisničku podršku. |
|---|---|
| Dostava | Dostupna je ubrzana, teretna i međunarodna dostava. |
| Stanje | 100% Novo s originalnom ambalažom |
| Plaćanje | Prihvaćamo American Express, Discover, MasterCard, PayPal i Visa. Naša stranica je osigurana RapidSSL-om. |
| Luka za otpremu | ShangHai, Xiamen |
| Jamstvo | 12 mjeseci |
| Q: Jesu li naše cijene konkurentne? |
| A: Da, surađujemo s više od 50 zemalja širom svijeta. Kao vodeći dobavljač u Kini, nudimo značajne popuste temeljem tržišnih trendova. |
| Q: Koje je jamstveno razdoblje? |
| A: Svi naši novi i originalni proizvodi dolaze sa standardnim jamstvom od jedne godine. |
| Q: Koje metode plaćanja prihvaćamo? |
| A: Zahtijevamo 100% T/T (telegrafski transfer) uplatu prije otpreme. Za artikle s rokom isporuke, potrebno je unaprijed uplatiti 30% depozita, a preostalih 70% prije otpreme. Ako imate predstavnika u Kini, možete preko njega dogovoriti prijenos RMB. |
| Q: Koje metode dostave koristimo? |
| A: Uglavnom koristimo FedEx, DHL, UPS i BRE za dostavu. Ako imate račun kod bilo kojeg od ovih prijevoznika, možete sami obaviti otpremu. Također nudimo besplatnu dostavu za špeditere sa sjedištem u Kini. |
| Q: Koje je naše vrijeme isporuke? |
| A: Dostava obično traje 1-3 dana nakon primitka početne uplate. Za artikle s rokom isporuke, otprema će se izvršiti prema navedenom rasporedu. |
| Q: Kako pakiramo robu? |
| A: Osiguravamo sigurno pakiranje s višestrukim slojevima zaštite. Proizvodi se prvo stavljaju u njihove originalne kutije i zatvaraju naljepnicama. Zatim se dodaje sloj mjehurićaste folije za zaštitu od udaraca tijekom transporta. Na kraju, predmeti se sigurno pakuju u čvrste kutije. |
| Q: Kako nas kupci mogu kontaktirati i zatražiti ponudu? |
| A: Možete nas kontaktirati putem e-pošte, WhatsAppa, WeChata, Skypea ili vaše omiljene komunikacijske platforme. Obratite nam se sa svojim potrebama, a mi ćemo vam pružiti brzu, prilagođenu ponudu. |
Nedavno pregledano
Ekspresna dostava
Opsežan inventar
Osiguranje kvalitete
