PLC Interface Module Yokogawa S2EN501-S00030

PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030
PLC Interface Module Yokogawa S2EN501-S00030

PLC Interface Module Yokogawa S2EN501-S00030

This S2EN501-S00030 PLC Interface Module was manufactured by YOKOGAWA, In Stock, 100% Guaranteed Brand New and Authentic. Link to More Information

 
Manufacturer:
YOKOGAWA
Part Number:
S2EN501-S00030
Vrsta proizvoda:
Country of Origin:
Japan
Condition:
New With Original Package
Shipping Port:
ShangHai, Xiamen
Warranty:
12 Months
 

Product Description

The S2EN501-S00030 is a high-performance communication interface module engineered for integration with Yokogawa STARDOM and CENTUM series controllers. It functions as a critical networking bridge that enables synchronized data exchange within distributed control system (DCS) architectures.

Designed for high-availability industrial environments, the S2EN501-S00030 supports redundant network configurations, ensuring uninterrupted communication and preventing data loss during critical process operations. Its optimized hardware architecture enables low-latency communication between CPU units and remote I/O nodes, helping maintain stable control performance in complex automation systems.

With built-in diagnostic indicators and industrial-grade network protection, this module enhances system reliability while simplifying troubleshooting and maintenance in large-scale automation deployments.

Technical Specifications

Parameter Specification
Model Number S2EN501-S00030
Module Type Ethernet Communication / Interface Module
Protocol Support V net, Ethernet/IP, Modbus TCP/IP
Redundancy Support Dual-redundant configuration for fail-safe operation
Data Rate 10/100 Mbps auto-sensing high-speed transmission
Power Consumption Low-power industrial design (typically <0.5A at 5V DC)
Connectivity Dual RJ45 or dedicated bus interface connectors
Isolation Voltage 500V AC signal-to-ground isolation
Status Indicators LED diagnostics for Link, Activity, and Hardware Status
Operating Temperature -20°C to +70°C

Application Scenarios

The S2EN501-S00030 communication module is commonly deployed in industrial sectors where continuous operation and data reliability are critical, including power generation plants, water treatment facilities, petrochemical processing units, and large-scale manufacturing systems.

Within these environments, the module manages high-speed communication between central controllers and distributed field devices, enabling real-time monitoring, diagnostics, and control actions. It is particularly valuable when expanding existing Yokogawa PLC or DCS racks, allowing engineers to integrate modern Ethernet-based networking into established control infrastructures.

FAQ

Q: Does the S2EN501-S00030 require specific firmware versions for installation?
A: Yes. Compatibility depends on the controller’s current Revision (Rev) level and system firmware. It is recommended to verify that the system software version supports the module’s hardware revision to ensure full functionality.

Q: Is this module hot-swappable?
A: The S2EN501-S00030 supports redundant system configurations that allow maintenance with minimal system disruption. However, installation or removal should always follow the backplane safety procedures and system maintenance guidelines specified for the controller platform.

Brze ponude Primite cijenu i dostupnost BRZO od našeg posvećenog tima za korisničku podršku.
Dostava Dostupna je ubrzana, teretna i međunarodna dostava.
Stanje 100% Novo s originalnom ambalažom
Plaćanje Prihvaćamo American Express, Discover, MasterCard, PayPal i Visa. Naša stranica je osigurana RapidSSL-om.
Luka za otpremu ShangHai, Xiamen
Jamstvo 12 mjeseci
Q: Jesu li naše cijene konkurentne?
A: Da, surađujemo s više od 50 zemalja širom svijeta. Kao vodeći dobavljač u Kini, nudimo značajne popuste temeljem tržišnih trendova.
Q: Koje je jamstveno razdoblje?
A: Svi naši novi i originalni proizvodi dolaze sa standardnim jamstvom od jedne godine.
Q: Koje metode plaćanja prihvaćamo?
A: Zahtijevamo 100% T/T (telegrafski transfer) uplatu prije otpreme. Za artikle s rokom isporuke, potrebno je unaprijed uplatiti 30% depozita, a preostalih 70% prije otpreme. Ako imate predstavnika u Kini, možete preko njega dogovoriti prijenos RMB.
Q: Koje metode dostave koristimo?
A: Uglavnom koristimo FedEx, DHL, UPS i BRE za dostavu. Ako imate račun kod bilo kojeg od ovih prijevoznika, možete sami obaviti otpremu. Također nudimo besplatnu dostavu za špeditere sa sjedištem u Kini.
Q: Koje je naše vrijeme isporuke?
A: Dostava obično traje 1-3 dana nakon primitka početne uplate. Za artikle s rokom isporuke, otprema će se izvršiti prema navedenom rasporedu.
Q: Kako pakiramo robu?
A: Osiguravamo sigurno pakiranje s višestrukim slojevima zaštite. Proizvodi se prvo stavljaju u njihove originalne kutije i zatvaraju naljepnicama. Zatim se dodaje sloj mjehurićaste folije za zaštitu od udaraca tijekom transporta. Na kraju, predmeti se sigurno pakuju u čvrste kutije.
Q: Kako nas kupci mogu kontaktirati i zatražiti ponudu?
A: Možete nas kontaktirati putem e-pošte, WhatsAppa, WeChata, Skypea ili vaše omiljene komunikacijske platforme. Obratite nam se sa svojim potrebama, a mi ćemo vam pružiti brzu, prilagođenu ponudu.
 

Nedavno pregledano

Express Shipping icon
Ekspresna dostava
Brza dostava za vaše hitne zahtjeve.
Large stock icon
Opsežan inventar
Veliki lager za trenutnu dostavu.
Quality Assurance Icon
Osiguranje kvalitete
Autentične, vrhunske PLC i DCS komponente.
Global Service icon
Globalna usluga
Podrška klijentima širom svijeta pouzdanom uslugom.