PROSOFT 3150-MCM Modbus Master/Slave Communication Module

PROSOFT 3150-MCM Modbus Master/Slave Communication Module
PROSOFT 3150-MCM Modbus Master/Slave Communication Module
PROSOFT 3150-MCM Modbus Master/Slave Communication Module
PROSOFT 3150-MCM Modbus Master/Slave Communication Module

PROSOFT 3150-MCM Modbus Master/Slave Communication Module

This 3150-MCM Modbus Master/Slave Communication Module was manufactured by PROSOFT, In Stock, 100% Guaranteed Brand New and Authentic. Link to More Information

 
Manufacturer:
PROSOFT
Part Number:
3150-MCM
Country of Origin:
USA
Condition:
New With Original Package
Shipping Port:
ShangHai, Xiamen
Warranty:
12 Months
 

Overview

The Allen-Bradley 80026-524-01 is a 1500 Watt, 1-Phase AC/DC Power Supply with a 56V DC Output, designed to provide reliable power in industrial automation systems.

Specifications

Data Storage and Transfer

  • Up to 4000 registers can be stored and transferred to the PLC/SLC data tables.
  • Supports movement of the following data types:
    • Binary
    • Integer
    • ASCII
    • Floating point

Memory Mapping

  • Completely user-definable through data table configuration.

Communication Interfaces

  • RS-232C Handshaking for SCADA radio/modem applications.
  • RS-422/RS-485 compatibility for multi-drop applications (supports up to 32 slaves per port).
  • Satellite and Packet Radio support with configurable Inter-character Timeout per port.

Software Configuration

  • Configurable from processor ladder logic.
  • Slave Address: 1 to 247 (0 for broadcast).
  • Parity: None, odd, or even.
  • Stop Bits: 1 or 2.
  • Baud Rate: 300 to 38,400.
  • RTS to TxD: 0 to 65535 milliseconds (1 ms resolution).
  • RTS Off: 0 to 65535 milliseconds (1 ms resolution).
  • Timeout: 0 to 65535 milliseconds (1 ms resolution).

Modbus Slave Specifications

  • Protocol Modes:
    • RTU mode (CRC-16 error checking).
    • ASCII mode (LRC error checking with 7 and 8-bit formats).
  • Supported Modbus Function Codes:
    • 1: Read Output Status
    • 2: Read Input Status
    • 3: Read Multiple Data Registers
    • 4: Read Input Registers
    • 5: Force Single Coil (Latch/Unlatch)
    • 6: Preset (Write) Single Data Register
    • 8: Loopback Test (Test 0 only)
    • 15: Multiple Coil Latch/Unlatch
    • 16: Preset (Write) Multiple Data Registers
  • Supports broadcast commands from host.
  • Error Status and Communication Statistics are returned to the ladder processor.

Communication Modes

  • Pass-Through Mode: Allows conditional acceptance of write data by ladder logic. It transfers write commands from the host directly to the ladder for processing.
  • Command Routing Mode: Supports Slave-to-Master routing for up to six slave addresses, allowing a supervisor on a slave port to access data from routed slaves.

Hardware Specifications

  • Backplane Current Load:
    • 3100: 0.65 A
    • 3150: 0.15 A at 5V, 0.04 A at 24V
  • Operating Temperature: 0°C to 60°C
  • Storage Temperature: -40°C to 85°C
  • Connections:
    • 3100: 2 DB25 Female Connectors
    • 3150: 2 DB9 Male Connectors
Brze ponude Primite cijenu i dostupnost BRZO od našeg posvećenog tima za korisničku podršku.
Dostava Dostupna je ubrzana, teretna i međunarodna dostava.
Stanje 100% Novo s originalnom ambalažom
Plaćanje Prihvaćamo American Express, Discover, MasterCard, PayPal i Visa. Naša stranica je osigurana RapidSSL-om.
Luka za otpremu ShangHai, Xiamen
Jamstvo 12 mjeseci
Q: Jesu li naše cijene konkurentne?
A: Da, surađujemo s više od 50 zemalja širom svijeta. Kao vodeći dobavljač u Kini, nudimo značajne popuste temeljem tržišnih trendova.
Q: Koje je jamstveno razdoblje?
A: Svi naši novi i originalni proizvodi dolaze sa standardnim jamstvom od jedne godine.
Q: Koje metode plaćanja prihvaćamo?
A: Zahtijevamo 100% T/T (telegrafski transfer) uplatu prije otpreme. Za artikle s rokom isporuke, potrebno je unaprijed uplatiti 30% depozita, a preostalih 70% prije otpreme. Ako imate predstavnika u Kini, možete preko njega dogovoriti prijenos RMB.
Q: Koje metode dostave koristimo?
A: Uglavnom koristimo FedEx, DHL, UPS i BRE za dostavu. Ako imate račun kod bilo kojeg od ovih prijevoznika, možete sami obaviti otpremu. Također nudimo besplatnu dostavu za špeditere sa sjedištem u Kini.
Q: Koje je naše vrijeme isporuke?
A: Dostava obično traje 1-3 dana nakon primitka početne uplate. Za artikle s rokom isporuke, otprema će se izvršiti prema navedenom rasporedu.
Q: Kako pakiramo robu?
A: Osiguravamo sigurno pakiranje s višestrukim slojevima zaštite. Proizvodi se prvo stavljaju u njihove originalne kutije i zatvaraju naljepnicama. Zatim se dodaje sloj mjehurićaste folije za zaštitu od udaraca tijekom transporta. Na kraju, predmeti se sigurno pakuju u čvrste kutije.
Q: Kako nas kupci mogu kontaktirati i zatražiti ponudu?
A: Možete nas kontaktirati putem e-pošte, WhatsAppa, WeChata, Skypea ili vaše omiljene komunikacijske platforme. Obratite nam se sa svojim potrebama, a mi ćemo vam pružiti brzu, prilagođenu ponudu.
 

Nedavno pregledano

Express Shipping icon
Ekspresna dostava
Brza dostava za vaše hitne zahtjeve.
Large stock icon
Opsežan inventar
Veliki lager za trenutnu dostavu.
Quality Assurance Icon
Osiguranje kvalitete
Autentične, vrhunske PLC i DCS komponente.
Global Service icon
Globalna usluga
Podrška klijentima širom svijeta pouzdanom uslugom.