Overview

The IC200ALG264 is an analog input module that provides an interface to 15 current inputs. The inputs are single-ended, with all inputs sharing a common return.

Specifications

• Channels:

  • 15 single-ended inputs, one group.

• Module ID:

  • FFFFB50F (when configured for 4-20mA range)
  • FFFFB40F (when configured for 0-20mA range)

• Isolation:

  • User input to logic (optical) and to frame ground: 250VAC continuous; 1500VAC for 1 minute
  • Group to group: Not applicable
  • Channel to channel: None

• LED Indicators:

  • OK LED: See the "LED Indicators" section for description.

• Backplane Current Consumption:

  • 5V output: 100mA maximum

• External Power Supply:

  • None

• Thermal Derating:

  • None

• Configuration Parameters:

  • Range select (jumpers on carrier)

• Diagnostics:

  • Loss of Internal Power
  • Open wire detection for 4-20mA signals only

Input Characteristics

• Input Current:

  • 4 to 20mA (default: no terminal jumper installed)
  • 0 to 20mA (with terminal jumper installed)

• Input Impedance:

  • 100 Ohms

• Accuracy:

  • At 25°C: ±0.3% typical of full scale, ±0.5% maximum of full scale
  • At 0 to 60°C: ±1% maximum of full scale

• Resolution:

  • 15 bits
  • 0.5µA = 1 count (for 4-20mA range)
  • 0.625µA = 1 count (for 0-20mA range)

• Filter Response (3dB Corner Frequency):

  • 24 Hz ±20%

• Update Rate per Module:

  • 7.5ms

Compatibility

• Software:

  • VersaPro Software Version 2.0 or higher

• PLC Firmware:

  • VersaMax PLC CPU Firmware Version 2.10 or higher

• Ethernet NIU Firmware:

  • VersaMax Ethernet NIU Firmware Version 1.10 or higher

• DeviceNet, Profibus, or Genius NIU Firmware:

  • Planned for future release