Overview

The Power Supply IC695PSD040 is a 40-Watt supply designed to operate within an input voltage range of 18 VDC to 30 VDC. This power supply provides three distinct outputs:

• +5.1 VDC output
• +24 VDC relay output (can power circuits on Output Relay modules)
• +3.3 VDC output (used internally by RX3i modules with IC695 catalog numbers)

Specifications

• Nominal Rated Voltage: 24 VDC
• Input Voltage Range:
  • Start: 18 to 30 VDC
  • Run: 12 to 30 VDC
• Input Power: 60 Watts maximum at full load
• Inrush Current: 4 Amps (100 milliseconds maximum)
• Output Power: 40 Watts maximum (total of both outputs)
  • 5.1 VDC: 30 Watts maximum
  • 3.3 VDC: 30 Watts maximum
• Output Voltage:
  • 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal)
  • 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal)
• Output Current:
  • 5.1 VDC: 0 to 6 Amps
  • 3.3 VDC: 0 to 9 Amps
• Isolation: None
• Ripple (all outputs): 50 mV
• Noise (all outputs): 50 mV
• Ride-through Time: 10 ms
  This is the length of time the power supply maintains valid outputs during an interruption of the power source. If used with IC694 and IC693 modules that have relay outputs, precautions should be taken as dropouts in the source voltage may cause relay dropouts.
• Wiring Terminals: Each terminal accepts 14 AWG to 22 AWG wire.
• Terminal Current: 6 Amps
• Number of Daisy-Chained PSD040 Supplies: Up to 2