{"product_id":"4000056-002-triconex-tricon-system-i-o-bus-cable","title":"4000056-002 Triconex Tricon System I\/O Bus Cable","description":"\u003ch2\u003eTriconex 4000056-002 I\/O Bus Cable\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eTriconex 4000056-002\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e4000056-002\u003c\/strong\u003e I\/O Bus Cable, operates as a dedicated hardware component for high-integrity inter-chassis signal interconnection within Tricon Safety Instrumented System racks. The 1.5-meter cable assembly physically links primary processor chassis backplanes to secondary expansion I\/O racks using dual 50-pin D-sub connectors. By maintaining strict electrical continuity and mechanical strain relief across redundant bus paths, the assembly routes high-frequency system clock, data, and diagnostic buses without introducing signal attenuation or transmission jitter into the system backplane architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003e4000056-002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eTriconex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e1.5 meters (Cable Length)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard field cabinet ambient limits (-20 deg C to +70 deg C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePassive bus assembly (Zero active draw)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003eI\/O Communication Bus Cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003eDual 50-pin D-sub connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eTriple Modular Redundancy \u0026amp; Signal Integrity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eTriconex 4000056-002\u003c\/strong\u003e cable assembly reinforces triple modular redundancy (TMR) architectures by preserving channel isolation across physical expansion chassis. Each connector pin map correlates directly to independent A, B, and C I\/O bus lines, preventing cross-talk between redundant safety legs. Internal braided copper shielding coupled with a continuous foil wrap blocks external electromagnetic interference (EMI) and radio frequency interference (RFI). Galvanic grounding paths integrated into the metal D-sub connector shells divert high-frequency ground noise away from active logic circuits, ensuring deterministic fail-safe state execution across all connected expansion modules.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What physical bend radius limits must technicians observe during cable installation?\u003c\/p\u003e\n\u003cp\u003eA: Installers must maintain a minimum static bend radius of 60 mm along the cable length. Exceeding this radius risks damaging the internal foil shield and altering conductor impedance, which leads to bus communication retries or intermittent node offline errors.\u003c\/p\u003e\n\u003cp\u003eQ: Can technicians hot-swap the I\/O bus cable while the Triconex system processes live signals?\u003c\/p\u003e\n\u003cp\u003eA: Technicians must never disconnect primary I\/O bus cables while the system operates in active mode without verifying bus redundancy status. Removing a cable segment breaks active backplane communication channels, forcing downstream I\/O modules into their defined fail-safe trip condition.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eStrict adherence to wiring and connector mounting rules ensures optimal signal transmission and mechanical stability:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Alignment and Seating\u003c\/strong\u003e: Align the 50-pin D-sub male connector precisely with the corresponding female backplane socket on the chassis. Push the connector straight inward without applying angular force to avoid bending internal pin contacts. Tighten both captive jackscrews manually until fully seated to ensure a continuous ground bond across the metal shell.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Routing and Shielding\u003c\/strong\u003e: Route the cable assembly through dedicated low-voltage wiring ductways separate from high-power distribution lines. Maintain a minimum separation distance of 300 mm from 230 VAC power conduits and variable frequency drive outputs to prevent inductive noise pickup on the data lines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrain Relief\u003c\/strong\u003e: Secure the cable jacket to rack mounting rails using nylon tie-wraps within 100 mm of each connector end. Strain relief prevents mechanical stress on the terminal solder joints during cabinet door swings or high-vibration operational cycles.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"TRICONEX","offers":[{"title":"Default Title","offer_id":51181264372024,"sku":"4000056-002","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/558.jpg?v=1789110530","url":"https:\/\/www.automodulexpert.com\/products\/4000056-002-triconex-tricon-system-i-o-bus-cable","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}