{"product_id":"abb-repl-02-ethernet-powerlink-adapter-module","title":"ABB REPL-02 Ethernet POWERLINK Adapter Module","description":"\u003ch2\u003eABB REPL-02 Ethernet POWERLINK Adapter Module\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eABB REPL-02\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eREPL-02\u003c\/strong\u003e Ethernet POWERLINK Adapter Module, operates as a dedicated hardware component for drive status monitoring, command execution, and real-time fieldbus data exchange within ACS550, ACH550, and ACS800 drive platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eREPL-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eSwitzerland\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e14 cm x 10 cm x 4.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 deg C to +55 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003ePowered via drive option-adapter slot (5 VDC internal bus)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eEthernet POWERLINK Fieldbus Adapter Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Model\u003c\/td\u003e\n\u003ctd\u003eREPL-02\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Protocol\u003c\/td\u003e\n\u003ctd\u003eEthernet POWERLINK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNetwork Role\u003c\/td\u003e\n\u003ctd\u003eControlled Node\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDevice Profiles\u003c\/td\u003e\n\u003ctd\u003eCANopen DSP 402 and ABB Drives profile\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePhysical Connectors\u003c\/td\u003e\n\u003ctd\u003eEthernet connectors X1 and X2 (RJ45 interface)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAddressing\u003c\/td\u003e\n\u003ctd\u003eHardware node address selection via DIP switch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Drives\u003c\/td\u003e\n\u003ctd\u003eSelected ABB ACS550, ACH550, ACS800 series\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eDeterministic Industrial Networks and Firmware Integration\u003c\/h3\u003e\n\u003cp\u003eThe adapter module interfaces with the drive control board through the option slot backplane, mapping drive control words, reference values, and diagnostic status bytes directly to the Ethernet POWERLINK network payload. High backplane bus communication velocity ensures microsecond-level synchronization between the network master and drive PWM algorithms under both CANopen DSP 402 and ABB Drives communication profiles. Active circuit pathways maintain strict firmware flash compatibility with target drive control software, allowing direct node configuration via drive control panel parameters and standard XDD device description files. Internal galvanic isolation shields the Ethernet physical layer transceiver from high-voltage motor drive switching noise.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: How is the Ethernet POWERLINK Controlled Node address configured on the module?\u003c\/p\u003e\n\u003cp\u003eA: Technicians set the physical Controlled Node address directly on the hardware using the onboard DIP switch panel before slotting the module into the drive option chassis.\u003c\/p\u003e\n\u003cp\u003eQ: Can the REPL-02 module be hot-swapped while the variable frequency drive is powered on?\u003c\/p\u003e\n\u003cp\u003eA: No, technicians must remove auxiliary and main AC power from the VFD and wait for the intermediate DC bus capacitors to discharge fully before installing or removing the option adapter to prevent damage to the backplane connector pins.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eInsert the module carefully into the designated option slot of the host drive, ensuring proper alignment of the backplane pin header before pressing the unit firmly into place. Tighten the mechanical retaining screw to establish a solid grounding path between the module housing and the drive chassis ground terminal.\u003c\/p\u003e\n\u003cp\u003eRoute CAT5e or CAT6 industrial shielded twisted-pair (STP) network cables through dedicated low-voltage wire runs, maintaining physical separation from high-voltage AC input lines and motor lead cables. Ground the cable shielding continuously at both connector ends according to standard industrial EMC recommendations. Maintain a minimum engagement depth of 5 full threads on all external conduit fittings attached to the drive enclosure perimeter.\u003c\/p\u003e","brand":"ABB","offers":[{"title":"Default Title","offer_id":53114092650808,"sku":"REPL-02","price":200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/697..jpg?v=1791533835","url":"https:\/\/www.automodulexpert.com\/products\/abb-repl-02-ethernet-powerlink-adapter-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}