{"product_id":"analog-input-module-general-electric-ic670alg230k","title":"Analog Input Module General Electric IC670ALG230K","description":"\u003cp\u003eConfigured for precision signal acquisition in Field Control networks, the \u003cstrong\u003eGeneral Electric IC670ALG230K\u003c\/strong\u003e (\u003cstrong\u003eIC670ALG230K\u003c\/strong\u003e Analog Input Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IC670ALG230K represents a specific hardware revision within the Field Control analog input product line. The \"K\" suffix denotes the current production standard for this model, ensuring backward compatibility with existing field wiring and terminal base configurations. There are no user-configurable hardware sub-variants for this catalog number.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC670ALG230K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e7.6 cm x 7.6 cm x 10.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBIU backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eAnalog Input Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet and EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC670ALG230K is engineered for deterministic data integration across Field Control platforms. The module performs high-resolution analog-to-digital conversion, mapping field sensor signals into the internal backplane bus with minimal signal jitter. Firmware flash compatibility is critical, as the module must be correctly identified by the Bus Interface Unit (BIU) to participate in cyclic I\/O scans. Designers must ensure that the backplane bus communication velocity is correctly configured to match the sampling requirements of the analog inputs, preventing latency in the control loop.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does this module require external loop power for 4-20 mA sensors? A: The IC670ALG230K often requires an external user supply for loop-powered transmitters. Consult the specific module wiring manual for the required voltage and connection topology to ensure proper loop excitation.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module compatible with existing Field Control terminal bases? A: Yes, the IC670ALG230K is designed for standard Field Control mounting hardware. Ensure the module keying is properly aligned with the terminal base to prevent backplane pin damage during insertion.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the mounting surface and DIN rail are clean to prevent mechanical stress on the module housing.\u003c\/li\u003e\n\u003cli\u003eAlign the module carefully with the terminal base to prevent bending the backplane pins during installation.\u003c\/li\u003e\n\u003cli\u003eUtilize high-quality shielded twisted-pair cabling for all analog input lines to minimize the influence of electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eTerminate shields at a single, low-impedance earth ground point to prevent ground loop currents that could introduce noise into low-level analog measurements.\u003c\/li\u003e\n\u003cli\u003eVerify that all terminal screws are tightened to the specified torque value to ensure stable signal connectivity throughout the operational life of the module.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52624180871480,"sku":"IC670ALG230K","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC670ALG230K2.jpg?v=1783584425","url":"https:\/\/www.automodulexpert.com\/products\/analog-input-module-general-electric-ic670alg230k","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}