{"product_id":"drive-control-board-general-electric-ds215sdccg1azz01b","title":"Drive Control Board General Electric DS215SDCCG1AZZ01B","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS215SDCCG1AZZ01B\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS215SDCC\u003c\/strong\u003e Drive Control Board, operates as a dedicated hardware component for motor regulation and command signal processing within drive control platforms. This module provides direct physical\/electrical execution of gate firing control, feedback loop monitoring, and real-time adjustment of drive output parameters.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS215SDCC\u003c\/strong\u003e base model defines the drive control architecture for General Electric industrial power conversion units. The suffix \u003cstrong\u003eG1AZZ01B\u003c\/strong\u003e denotes the specific hardware revision, firmware interface configuration, and component population density optimized for the associated drive's operational power range.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS215SDCCG1AZZ01B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.2 cm x 12.2 cm x 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDerived from control power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eControl Function\u003c\/td\u003e\n\u003ctd\u003eDrive Gating and Regulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eV\/Hz and Field-Oriented Vector Control\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS215SDCCG1AZZ01B\u003c\/strong\u003e utilizes high-speed internal logic to manage motor torque and velocity through either standard V\/Hz scalar control or advanced field-oriented vector control algorithms. The board processes current and speed feedback signals to adjust the pulse-width modulation (PWM) output, ensuring stable motor performance under varying load conditions. Thermal heat sink dissipation profiles are maintained by the drive chassis, while this control board manages the switching frequency to minimize harmonic distortion suppression requirements at the motor terminals. The integration of these control loops ensures precise actuator loop feedback response, which is necessary for maintaining consistent motor speed and torque regulation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does this board support field-programmable logic updates?\u003c\/p\u003e\n\u003cp\u003eA: The board supports firmware updates through authorized GE programming tools. Field personnel should not attempt to overwrite onboard code without the correct interface cables and validated software files provided by the manufacturer.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module compatible with live insertion or hot-swapping?\u003c\/p\u003e\n\u003cp\u003eA: No. The drive control architecture does not support live insertion. Removing or installing the board while the drive is energized can cause catastrophic failure to the control circuits and the power bridge gate drivers.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the drive and verify that the DC bus capacitors are fully discharged using a calibrated voltmeter before removing any panels.\u003c\/li\u003e\n\u003cli\u003eObserve standard anti-static procedures; use a grounded wrist strap when handling the \u003cstrong\u003eDS215SDCCG1AZZ01B\u003c\/strong\u003e to prevent electrostatic discharge damage to the onboard microprocessors.\u003c\/li\u003e\n\u003cli\u003eAlign the board with the control rack guides and press firmly to seat the connector into the backplane, ensuring that all pins are aligned to prevent bending.\u003c\/li\u003e\n\u003cli\u003eSecure the board using the faceplate captive screws to ensure a reliable electrical ground connection to the drive chassis.\u003c\/li\u003e\n\u003cli\u003eInspect all ribbon cables and signal connectors for secure seating and verify that no stray wires are touching the PCB components.\u003c\/li\u003e\n\u003cli\u003eBefore full operation, confirm the drive control parameters are correctly configured via the operator interface to match the motor and application requirements.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52583690338616,"sku":"DS215SDCCG1AZZ01B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS215SDCCG1AZZ01B2.jpg?v=1782804858","url":"https:\/\/www.automodulexpert.com\/products\/drive-control-board-general-electric-ds215sdccg1azz01b","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}