{"product_id":"ds200dcfbg1b-dc-power-and-feedback-board-general-electric","title":"DS200DCFBG1B DC Power and Feedback Board General Electric","description":"\u003cp\u003eConfigured for power regulation and instrumentation signal feedback in Mark V control platforms, the \u003cstrong\u003eGeneral Electric DS200DCFBG1B\u003c\/strong\u003e (\u003cstrong\u003eDS200DCFBG1B\u003c\/strong\u003e Power Supply Board) provides direct physical\/electrical execution for managing DC power distribution and feedback monitoring across the control system.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DS200DCFBG1B utilizes a specific nomenclature system to define its hardware characteristics. The \"DS\" prefix identifies the component as part of the GE Industrial Control Systems. The \"200\" series designation indicates a board architecture that does not contain embedded firmware. The \"DCFB\" acronym classifies the unit as a Power and Feedback Board, while the \"G1B\" suffix represents the group variation and specific revision level of the hardware.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200DCFBG1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark V PCB form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDetermined by backplane bus load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Function\u003c\/td\u003e\n\u003ctd\u003eDC power regulation and feedback signal management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe DS200DCFBG1B manages power and feedback signals to ensure the deterministic integrity of the backplane bus. By providing a stable DC reference and processing feedback from field instruments, the board prevents signal noise from interfering with the deterministic communication velocity of the system. This ensures that the control processor receives precise data without latency, supporting the real-time operational requirements of the turbine control environment.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DS200DCFBG1B contain user-configurable firmware?\u003c\/p\u003e\n\u003cp\u003eA: No, the \"200\" designation in the model number confirms this board does not contain firmware. Logic and control parameters are managed externally by the primary system controller.\u003c\/p\u003e\n\u003cp\u003eQ: Is this board field-replaceable while the cabinet is powered?\u003c\/p\u003e\n\u003cp\u003eA: No, the DS200DCFBG1B does not support hot-swapping. Ensure the rack power is fully isolated and verified with a meter before attempting any installation or removal procedures.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm system shutdown and apply lock-out\/tag-out procedures to the rack power supply.\u003c\/li\u003e\n\u003cli\u003eCarefully guide the DS200DCFBG1B into the designated rack slot, ensuring the backplane connectors are correctly aligned to prevent pin deformation.\u003c\/li\u003e\n\u003cli\u003eSeat the board firmly to ensure reliable electrical contact with the backplane. Secure the front panel to the rack frame to maintain mechanical stability and chassis grounding.\u003c\/li\u003e\n\u003cli\u003eVerify that all feedback signal wiring is routed away from high-voltage cables to mitigate electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003ePerform a voltage check at the output terminals once power is restored to verify that the DC supply is within operational limits.\u003c\/li\u003e\n\u003cli\u003eMonitor the ambient operating temperature within the cabinet to ensure it remains within the 0 to 60 deg C range.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52592673816888,"sku":"DS200DCFBG1B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200DCFBG1B1.jpg?v=1782892601","url":"https:\/\/www.automodulexpert.com\/products\/ds200dcfbg1b-dc-power-and-feedback-board-general-electric","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}