{"product_id":"ds200pccaggacb-power-connect-card-general-electric","title":"DS200PCCAGGACB Power Connect Card General Electric","description":"\u003cp\u003eConfigured for power bridge interface and signal management in Mark V turbine control platforms, the \u003cstrong\u003eGeneral Electric DS200PCCAGGACB\u003c\/strong\u003e (\u003cstrong\u003eDS200PCCAGGACB\u003c\/strong\u003e Power Connect Interface Board) provides direct physical\/electrical execution for interconnecting control circuitry with SCR power bridges.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DS200PCCAGGACB designation follows specific GE manufacturing standards. The \"PCCA\" identifier denotes the Power Connect Card architecture, while the \"GGACB\" suffix indicates the hardware revision level, incorporating optimized trace routing for high-speed SCR gate signaling and integrated Modbus communication logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200PCCAGGACB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.7kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm x 80 mm x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +85 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Function\u003c\/td\u003e\n\u003ctd\u003ePower Connect Interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eModbus TCP\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe DS200PCCAGGACB supports deterministic communication flows required for SCR power bridge synchronization. By leveraging the Modbus TCP\/IP protocol, the card ensures that gate trigger timing and feedback signals are processed with minimal latency across the control network. This architecture allows the Mark V system to maintain precise power signal management, ensuring that switching sequences are executed in strict alignment with the turbine's operational phase requirements.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this board be configured for different communication protocols?\u003c\/p\u003e\n\u003cp\u003eA: The card is natively designed to support Modbus TCP\/IP. It does not support field-reconfiguration to alternate protocols like Profibus-DP without specialized firmware updates and factory validation.\u003c\/p\u003e\n\u003cp\u003eQ: Is this card hot-swappable in a powered-up drive cabinet?\u003c\/p\u003e\n\u003cp\u003eA: No, the DS200PCCAGGACB does not support hot-swapping. The 24 VDC power supply must be isolated and the backplane de-energized before module installation to protect the bridge interface circuitry.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the drive system is in a zero-energy state and verify all power terminals are de-energized with a calibrated voltmeter.\u003c\/li\u003e\n\u003cli\u003eVerify the 100 mm x 80 mm footprint matches the available space within the control housing to ensure sufficient airflow for thermal management.\u003c\/li\u003e\n\u003cli\u003eAlign the board with the mounting standoffs, ensuring the connector interfaces for the SCR bridge are correctly oriented.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the corner mounting points. Ensure proper metal-to-metal contact with the chassis to provide an adequate ground path for noise suppression.\u003c\/li\u003e\n\u003cli\u003eConnect the Modbus TCP\/IP cabling, ensuring that the cable shield is terminated at the designated grounding bar to minimize electromagnetic interference (EMI) impact on data packets.\u003c\/li\u003e\n\u003cli\u003eInspect all signal paths after installation to ensure no physical stress is applied to the board components before re-energizing the 24 VDC power supply.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52592663757112,"sku":"DS200PCCAGGACB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200PCCAGGACB2.jpg?v=1782892600","url":"https:\/\/www.automodulexpert.com\/products\/ds200pccaggacb-power-connect-card-general-electric","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}