{"product_id":"ds200slcg3ahd-lan-communication-card-ge","title":"DS200SLCG3AHD LAN Communication Card GE","description":"\u003cp\u003eConfigured for high-speed network integration in Mark V Speedtronic turbine control systems, the \u003cstrong\u003eGE DS200SLCG3AHD\u003c\/strong\u003e (\u003cstrong\u003eDS200SLCG3AHD\u003c\/strong\u003e LAN Communication Card) provides direct physical and electrical execution of Ethernet data transmission protocols. The module facilitates data exchange between internal control loops and external networks to enable system monitoring.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200SLCG3AHD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e 0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark V card form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication\u003c\/td\u003e\n\u003ctd\u003eEthernet (Up to 100 Mbps)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control Backplane Integration\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE DS200SLCG3AHD\u003c\/strong\u003e utilizes onboard processing to manage data packets across the Mark V backplane architecture. To maintain deterministic network performance, the firmware flash compatibility must be verified against the host controller revision. The card supports I\/O density scaling requirements by providing dual-port redundancy, allowing for fault-tolerant communication loops. Users must ensure that backplane bus communication velocity settings are correctly configured to prevent latency during high-speed data transmission cycles.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the DS200SLCG3AHD module supported for hot-swapping in an active Mark V rack? A: No. The Mark V backplane connector is not designed for hot-swapping. The control rack must be de-energized prior to any module installation or removal to avoid electrical damage to the pins or the internal circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: How is redundancy managed by the dual-port configuration? A: The dual-port design allows for simultaneous link operation, providing a fail-over path if the primary network connection is interrupted. Ensure that both ports are correctly configured within the control software to enable seamless redundancy switching.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower Lockdown: Ensure the control rack is completely isolated from the power source before handling the communication card.\u003c\/li\u003e\n\u003cli\u003eSlot Alignment: Carefully align the module with the guide rails in the designated rack slot. Apply uniform pressure to fully seat the backplane connector.\u003c\/li\u003e\n\u003cli\u003eGrounding: Verify that the chassis ground is secure. Ensure the front panel makes firm electrical contact with the rack frame to maintain effective EMI shielding.\u003c\/li\u003e\n\u003cli\u003eCabling: Connect shielded Ethernet cabling to the dual-port interface. Route cables within dedicated wireways, maintaining separation from high-current power conductors to reduce inductive interference.\u003c\/li\u003e\n\u003cli\u003eVerification: Upon re-energizing the system, observe the diagnostic indicators to confirm the module has completed internal power-on self-tests and established a network link.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52599999365432,"sku":"DS200SLCG3AHD","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200SLCCG3AHD.jpg?v=1783066771","url":"https:\/\/www.automodulexpert.com\/products\/ds200slcg3ahd-lan-communication-card-ge","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}