{"product_id":"ds200tcdag1bcb-digital-i-o-board-ge","title":"DS200TCDAG1BCB Digital I\/O Board GE","description":"\u003cp\u003eConfigured for digital signal interfacing in turbine control platforms, the \u003cstrong\u003eGE DS200TCDAG1BCB\u003c\/strong\u003e (\u003cstrong\u003eDS200TCDAG1BCB\u003c\/strong\u003e Digital I\/O Board) provides direct physical\/electrical execution. This module handles 32 distinct digital channels to facilitate command-and-control logic between the turbine control system and peripheral field devices.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TCDAG1BCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.75 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e23 cm x 17 cm x 4.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard Industrial Range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e350 mA at 24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Inputs\u003c\/td\u003e\n\u003ctd\u003e16 channels (24 VDC, sinking)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital Outputs\u003c\/td\u003e\n\u003ctd\u003e16 channels (24 VDC, 0.5 A per channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Connectivity\u003c\/td\u003e\n\u003ctd\u003e1 backplane connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane bus communication velocity and firmware compatibility\u003c\/h3\u003e\n\u003cp\u003eThe board maintains interface synchronization through a dedicated backplane connector, supporting deterministic data transfer cycles required for turbine control loop stability. Firmware flash compatibility is governed by the onboard FPGA configuration, which serves as the primary logic gate for channel status reporting. The module scales its I\/O density by utilizing 16 optocouplers for input isolation and 16 relay drivers for output load switching, ensuring signal integrity across high-speed bus communication windows.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Is this module compatible with hot-swapping procedures?\u003c\/p\u003e\n\u003cp\u003eA: No, this module does not support hot-swapping. The host system backplane must be completely de-energized before extracting or inserting the board to prevent electrical short-circuiting of the 24 VDC power supply or corruption of backplane signals.\u003c\/p\u003e\n\u003cp\u003eQ: What is the requirement for the 6-pin power terminal block?\u003c\/p\u003e\n\u003cp\u003eA: The 6-pin terminal block is dedicated to the 24 VDC input. Ensure the supply voltage remains within the specified range of 24 VDC ±10% to prevent erratic behavior of the output relay drivers or optocoupler logic.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the system rack and verify that the 24 VDC supply is disconnected before installation.\u003c\/li\u003e\n\u003cli\u003eEnsure the rack slot is free of debris. Slide the module into the designated guide rails until the backplane connector is firmly seated.\u003c\/li\u003e\n\u003cli\u003eSecure the module to the chassis using the provided hardware to maintain electrical continuity with the rack ground.\u003c\/li\u003e\n\u003cli\u003eTerminate the 24 VDC power source to the 6-pin terminal block, ensuring proper polarity.\u003c\/li\u003e\n\u003cli\u003eConnect field wiring to the I\/O terminals, utilizing shielded twisted-pair cables to mitigate electromagnetic interference, with shields grounded at a single common reference point.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52608778567992,"sku":"DS200TCDAG1BCB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCDAG1BCB.jpg?v=1783066769","url":"https:\/\/www.automodulexpert.com\/products\/ds200tcdag1bcb-digital-i-o-board-ge","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}