{"product_id":"ds200tcpdg-1b-un-power-distribution-module-ge","title":"DS200TCPDG 1B\/UN Power Distribution Module GE","description":"\u003cp\u003eConfigured for high-voltage power distribution in Mark V control system platforms, the \u003cstrong\u003eGE DS200TCPDG 1B\/UN\u003c\/strong\u003e (\u003cstrong\u003eDS200TCPDG 1B\/UN\u003c\/strong\u003e Power Distribution Module) provides direct physical\/electrical execution. This hardware component manages the routing of 125 VDC power to TCPS boards, TCEA boards, and various I\/O cores within the control architecture. The module incorporates integrated mechanical switches to facilitate independent power isolation for specific control cores and provides direct supply paths for solenoid output terminal boards and ignition transformer circuits.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TCPDG 1B\/UN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e30 x 25 x 5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard 0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on connected TCPS and TCEA load profiles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Input\u003c\/td\u003e\n\u003ctd\u003e125 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Location\u003c\/td\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus and Control Architecture\u003c\/h3\u003e\n\u003cp\u003eThe DS200TCPDG 1B\/UN module serves as a critical node in the Mark V backplane infrastructure. It interfaces with the control engine core to ensure stability across deterministic networks. The module supports specific firmware flash compatibility protocols required for Mark V maintenance, ensuring that the backplane bus communication velocity is maintained during load distribution. Proper engagement with the position chassis is required to maintain signal integrity for the CTBA terminal board monitoring functions.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DS200TCPDG 1B\/UN support hot-swap operations under full 125 VDC load?\u003c\/p\u003e\n\u003cp\u003eA: No. Power must be isolated at the source breaker before removing or installing the module to prevent electrical arcing and potential damage to the backplane connectors.\u003c\/p\u003e\n\u003cp\u003eQ: Can the TCPD board switches be used to isolate individual digital I\/O cores?\u003c\/p\u003e\n\u003cp\u003eA: The switches are designed to disconnect power to specific cores; however, while digital I\/O cores do not draw direct power from the position, the associated DTBC and DTBD solenoid terminal boards remain dependent on this feed. Verify state before isolation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the control cabinet is de-energized and follows LOTO (Lockout-Tagout) procedures before accessing the position.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the designated backplane slot, ensuring the pin-to-socket orientation is correct to prevent bent pins.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the provided mechanical mounting hardware to ensure vibration resistance in high-EMC environments.\u003c\/li\u003e\n\u003cli\u003eVerify all cable terminations for the CTBA, DTBC, and DTBD terminal boards, ensuring torque settings meet industrial standards for low-resistance connections.\u003c\/li\u003e\n\u003cli\u003ePrior to restoring power, check the position of all independent core disconnect switches to ensure the system returns to the intended operating configuration.\u003c\/li\u003e\n\u003cli\u003eVerify ground continuity between the module chassis and the system main ground bus to mitigate surge risks.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52613761859896,"sku":"DS200TCPDG 1B\/UN","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCPDG_1BUN.jpg?v=1783412332","url":"https:\/\/www.automodulexpert.com\/products\/ds200tcpdg-1b-un-power-distribution-module-ge","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}