{"product_id":"ds200tcpdg1b-process-control-board-ge","title":"DS200TCPDG1B Process Control Board GE","description":"\u003cp\u003eThe \u003cstrong\u003eGE DS200TCPDG1B\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TCPD\u003c\/strong\u003e Process Control Board, operates as a dedicated hardware component for high-speed data processing and communication within Mark VII control platforms. This module provides direct physical\/electrical execution of protocol conversion and I\/O management, utilizing the MODBUS\/TCP standard to interface with industrial network nodes.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TCPDG1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e13.5 x 10.2 x 2.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Current\u003c\/td\u003e\n\u003ctd\u003eMax 250 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtocol\u003c\/td\u003e\n\u003ctd\u003eMODBUS\/TCP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet and Backplane Bus Communication Velocity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS200TCPDG1B\u003c\/strong\u003e functions as a deterministic communication bridge, translating field-level process data into the MODBUS\/TCP protocol structure. Within the Mark VII architecture, the module manages bus communication velocity to ensure real-time data synchronization between the control processor and networked peripheral devices. The card's internal logic is optimized to handle high-frequency data polling, minimizing latency in command execution. Proper firmware flash compatibility is required to align the board’s communication stack with the master controller's I\/O density scaling requirements, ensuring seamless data flow across the Ethernet-based industrial network.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this board capable of supporting live insertion (hot-swapping)?\u003c\/p\u003e\n\u003cp\u003eA: No. The DS200TCPDG1B does not support hot-swapping. The host control cabinet must be fully de-energized to prevent electrical faults and to ensure the integrity of the backplane communication pins during removal or installation.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle communication errors in a MODBUS\/TCP network?\u003c\/p\u003e\n\u003cp\u003eA: The board monitors packet transmission and reception integrity. If communication thresholds are breached, the onboard logic reports the status to the master controller via the designated diagnostic registers, allowing the system to trigger pre-configured fail-safe routines.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the Mark VII control system and verify the cabinet is de-energized using a calibrated voltmeter.\u003c\/li\u003e\n\u003cli\u003eMount the board securely within the designated rack slot, ensuring the backplane connectors are correctly aligned to prevent pin damage.\u003c\/li\u003e\n\u003cli\u003eTerminate the Ethernet cabling using shielded RJ45 connectors to minimize electromagnetic interference from high-voltage turbine equipment.\u003c\/li\u003e\n\u003cli\u003eEnsure the 24 VDC power supply input is connected with correct polarity, as reverse voltage can permanently damage the onboard communication controllers.\u003c\/li\u003e\n\u003cli\u003eVerify that the shield ground for the Ethernet cable is bonded to the chassis ground bar at the cabinet entrance to suppress potential ground loop noise.\u003c\/li\u003e\n\u003cli\u003eUpon restoration of power, observe the communication link LEDs to confirm the successful establishment of the MODBUS\/TCP network connection with the system master.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52583733756216,"sku":"DS200TCPDG1B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCPDG1B.jpg?v=1782804860","url":"https:\/\/www.automodulexpert.com\/products\/ds200tcpdg1b-process-control-board-ge","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}