{"product_id":"ds215udsag1azz01a-firmware-board-general-electric","title":"DS215UDSAG1AZZ01A Firmware Board General Electric","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS215UDSAG1AZZ01A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS215UDSAG1\u003c\/strong\u003e Firmware Board, operates as a dedicated hardware component for signal processing and operational monitoring within EX2000 Excitation Control subsystems. This module provides direct physical execution of data management, utilizing an integrated 80196 microprocessor to handle instruction code stored in onboard EPROM modules.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS215UDSAG1\u003c\/strong\u003e base model defines the firmware board architecture for Mark V excitation control. The suffix \u003cstrong\u003eAZZ01A\u003c\/strong\u003e denotes the specific firmware revision and configuration variant assigned to the hardware, ensuring compatibility with the logic requirements of the EX2000 control platform.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS215UDSAG1AZZ01A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.57kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicroprocessor\u003c\/td\u003e\n\u003ctd\u003e80196\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory\u003c\/td\u003e\n\u003ctd\u003eEPROM modules\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInterface\u003c\/td\u003e\n\u003ctd\u003e21 x 4-character displays, 32 LEDs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eFirmware Flash Compatibility and Processing\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS215UDSAG1AZZ01A\u003c\/strong\u003e manages the logic execution for excitation control by interpreting instructions fetched from its EPROM memory bank. The 80196 microprocessor facilitates high-speed data processing, which is transmitted to the system via connected cabling. Firmware flash compatibility is strictly dependent on the specific revision code; therefore, the board must be verified against the host system version to prevent operational mismatches. The integration of 21 alphanumeric displays and 32 status LEDs provides a diagnostic interface for monitoring internal bus activity and processor state without requiring external terminals.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the EPROM modules be updated in the field?\u003c\/p\u003e\n\u003cp\u003eA: Updating the EPROM modules requires specialized programming equipment. Field personnel should not attempt to modify the contents unless authorized and equipped with the appropriate GE firmware programming tools.\u003c\/p\u003e\n\u003cp\u003eQ: Do the 32 LEDs provide specific error codes for troubleshooting?\u003c\/p\u003e\n\u003cp\u003eA: The LEDs provide visual status feedback based on the operational logic defined in the firmware. Reference the specific system service manual to correlate individual LED patterns with internal diagnostic states.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the EX2000 excitation cabinet is de-energized and locked out according to standard safety procedures before accessing the electronics.\u003c\/li\u003e\n\u003cli\u003eCarefully align the board within its designated rack slot. Ensure that all connectors are properly oriented to prevent pin damage during insertion.\u003c\/li\u003e\n\u003cli\u003eVerify that all ribbon cables and signal wires are firmly seated in their respective headers on the board.\u003c\/li\u003e\n\u003cli\u003eCheck that no metallic debris or loose fasteners are present in the board area to avoid short circuits.\u003c\/li\u003e\n\u003cli\u003eOnce installed, restore power and monitor the 21 character displays and 32 LEDs during the boot sequence to ensure the firmware initializes correctly.\u003c\/li\u003e\n\u003cli\u003eIf the module fails to initialize, verify the cable connections and check for any physical signs of damage to the board surface or components.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52583675134264,"sku":"DS215UDSAG1AZZ01A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS215UDSAG1AZZ01A2.jpg?v=1782804856","url":"https:\/\/www.automodulexpert.com\/products\/ds215udsag1azz01a-firmware-board-general-electric","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}