{"product_id":"eddy-current-signal-converter-module-epro-con041","title":"Eddy Current Signal Converter Module | EPRO CON041","description":"\u003ch2\u003eEPRO CON041 Eddy Current Signal Conditioner\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eEPRO CON041\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eCON041\u003c\/strong\u003e Eddy Current Signal Converter, operates as a dedicated hardware component for high-precision signal conditioning within turbomachinery protection and TSI platforms. The module interfaces with non-contact eddy-current proximity probes and extension cables to condition raw high-frequency signals into linear voltage or 4-20 mA current outputs representing target shaft displacement.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCON041\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eEPRO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eGermany\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eCompact DIN-rail mount housing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to +65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLow-power 24 VDC loop operation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal\u003c\/td\u003e\n\u003ctd\u003eRaw eddy-current probe \/ extension cable signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Signal\u003c\/td\u003e\n\u003ctd\u003e4-20 mA current loop \/ proportional 0-10 VDC output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Type\u003c\/td\u003e\n\u003ctd\u003eStandard DIN rail mounting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eEddy-Current Probe Scaling \u0026amp; Gap Voltage Validation\u003c\/h3\u003e\n\u003cp\u003eThe CON041 conditions raw radio-frequency excitation signals driving the eddy-current probe coil, converting magnetic field impedance shifts into proportional DC voltage or current signals. Precise internal calibration circuits maintain linear eddy-current probe scaling across the defined measuring range. During installation, field technicians perform gap voltage validation by monitoring the signal converter output while setting the physical probe gap to reach target voltage levels (typically -10 VDC targets for standard TSI monitor inputs). This ensures optimal dynamic range for tracking rotor dynamics and suppresses signal cross-talk suppression issues across adjacent measurement channels.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What signal output options does the CON041 converter provide for downstream monitors?\u003c\/p\u003e\n\u003cp\u003eA: The converter generates calibrated proportional voltage signals (such as 0-10 VDC) or a standard 4-20 mA current loop output corresponding to target position and shaft displacement.\u003c\/p\u003e\n\u003cp\u003eQ: How does the CON041 interface with eddy-current proximity sensors?\u003c\/p\u003e\n\u003cp\u003eA: The unit connects directly to compatible EPRO proximity probes via matched extension cables through screw terminal connection blocks, completing the calibrated measuring chain.\u003c\/p\u003e\n\u003cp\u003eQ: What power source is required to energize the CON041 module?\u003c\/p\u003e\n\u003cp\u003eA: The converter operates using a standard 24 VDC industrial power supply, maintaining low overall power consumption within the control panel.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cp\u003eSnap the CON041 housing securely onto a clean 35 mm DIN rail inside an IP54 or NEMA rated control cabinet. Maintain at least 20 mm clearance on both sides of the module to facilitate natural thermal convection and prevent electrical interference between adjacent instruments.\u003c\/p\u003e\n\u003cp\u003eConnect the proximity probe extension cable leads to the dedicated input terminal block, taking care not to alter coaxial impedance characteristics. Wire the 24 VDC supply and output signal loops using shielded twisted-pair cables. Ground all cable shields at a single point on the main cabinet ground bar while isolating field-side shields to eliminate circulating ground loop currents. Verify output gap voltage using a calibrated digital multimeter before completing connection to the central DCS or TSI rack.\u003c\/p\u003e","brand":"EPRO","offers":[{"title":"Default Title","offer_id":51217968234808,"sku":"CON 041","price":256.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/CON0411.jpg?v=1759998563","url":"https:\/\/www.automodulexpert.com\/products\/eddy-current-signal-converter-module-epro-con041","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}