{"product_id":"ge-ds200tcdag2bba-digital-i-o-board","title":"GE DS200TCDAG2BBA Digital I\/O Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE DS200TCDAG2BBA\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TCDAG2BBA\u003c\/strong\u003e Digital I\/O Board, operates as a dedicated hardware component for high-speed digital contact processing and relay signal routing within Mark V turbine control architectures.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS200TCDAG2BBA\u003c\/strong\u003e is part of the TCDA board series. The \"G2\" designation indicates the hardware generation and channel configuration, while the \"BBA\" suffix defines the specific assembly revision, identifying the interface layout for JQ, JR, and JO connector compatibility with peripheral TCBA and TCRA modules.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TCDAG2BBA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.7kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark V PCB format\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDerived from TCPS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003eHigh-speed digital controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Interfaces\u003c\/td\u003e\n\u003ctd\u003eJQ, JR (Inputs); JO1, JO2 (Outputs)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnectors\u003c\/td\u003e\n\u003ctd\u003e2 x 50-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane bus communication velocity and firmware compatibility\u003c\/h3\u003e\n\u003cp\u003eThe board utilizes IONET ports (JX1 and JX2) to maintain deterministic communication via shielded twisted-pair links to TCQC boards. Firmware flash compatibility is managed through onboard PROM modules, which must be verified against the system's global application requirements. The internal bus communication velocity is optimized to ensure that digital contact states are updated across the IONET interface within the precise scan intervals required for turbine safety and protection logic.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: What is the function of the 8 hardware jumpers on this module?\u003c\/p\u003e\n\u003cp\u003eA: The jumpers are provided for physical configuration of the board's operational parameters, such as address setting or logic-level selection. These must be configured in accordance with the specific turbine control setup defined in the system manual before the module is energized.\u003c\/p\u003e\n\u003cp\u003eQ: How is power supplied to the DS200TCDAG2BBA board?\u003c\/p\u003e\n\u003cp\u003eA: Power is received through the JP connector, which is fed directly from the TCPS (Turbine Control Power Supply) board. Users must ensure that the voltage rails are within specifications before connecting the JP interface to prevent damage to the onboard logic and IONET drivers.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the Mark V rack is completely de-energized and that power is isolated from the TCPS board before handling.\u003c\/li\u003e\n\u003cli\u003eUtilize an ESD-rated wrist strap to prevent static discharge to the digital processor and IONET interface components.\u003c\/li\u003e\n\u003cli\u003eSlide the board into the designated rack slot, ensuring the backplane and front-facing connectors (JQ, JR, JO1, JO2, JX1, JX2, JP) are properly aligned and seated.\u003c\/li\u003e\n\u003cli\u003eVerify that the 10 status LEDs provide the correct diagnostic sequence upon power-up to confirm the board has initialized correctly.\u003c\/li\u003e\n\u003cli\u003eInspect the shielded twisted-pair IONET cables for proper termination and ground continuity at the TCQC interface points to prevent data signal degradation.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52609209794872,"sku":"DS200TCDAG2BBA","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCDAG1BCB.jpg?v=1783066769","url":"https:\/\/www.automodulexpert.com\/products\/ge-ds200tcdag2bba-digital-i-o-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}