{"product_id":"ge-ds200tcqag1bb-tc2000-common-analog-i-o-board","title":"GE DS200TCQAG1BB TC2000 Common Analog I\/O Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE DS200TCQAG1BB\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TCQAG1\u003c\/strong\u003e TC2000 Common Analog I\/O Board, operates as a dedicated hardware component for analog signal conditioning and data acquisition within Mark V turbine control systems. The module provides direct physical and electrical execution of input\/output signal mapping between field instrumentation and control logic processors.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TCQAG1BB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.54 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark V card form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-20 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12 W (5 VDC nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eTC2000 Common Analog I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control Backplane Integration\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE DS200TCQAG1BB\u003c\/strong\u003e utilizes the internal backplane bus to facilitate signal processing across the control rack architecture. Optimal deterministic performance is achieved by maintaining firmware flash compatibility with the host controller, ensuring that the analog signal conversion timing is synchronized with the system's global scan rate. I\/O density scaling must be monitored to prevent excessive load on the backplane power distribution. Users must verify that the backplane bus communication velocity settings are tuned to account for the conversion latency inherent in the module's data processing cycle.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the DS200TCQAG1BB be replaced while the system is under power?\u003c\/p\u003e\n\u003cp\u003eA: No. The backplane interface is not designed for hot-swapping. The control rack must be de-energized to prevent electrical faults or damage to the module pins during extraction or insertion.\u003c\/p\u003e\n\u003cp\u003eQ: How should signal shielding be handled on this board?\u003c\/p\u003e\n\u003cp\u003eA: High-precision analog circuitry requires strict noise mitigation. Ensure that all field sensors are connected via shielded twisted-pair cables and that the cable shields are terminated at the system common ground to suppress electromagnetic interference.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower Isolation: Disconnect all power sources from the cabinet to ensure a safe environment before handling the module.\u003c\/li\u003e\n\u003cli\u003eMounting: Secure the board into the designated rack slot, ensuring the connectors are correctly aligned. Tighten all mounting hardware to ensure firm contact with the rack chassis.\u003c\/li\u003e\n\u003cli\u003eSignal Wiring: Connect input sensors and output devices to the terminal blocks. Use shielded twisted-pair cabling for all analog signal runs to reduce electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eGrounding: Verify that the chassis ground connection is solid. Terminate cable shields according to standard industrial practices to prevent noise injection into the analog signal path.\u003c\/li\u003e\n\u003cli\u003eVerification: Once installed, power the system and use the diagnostic software to monitor input\/output scaling, confirming that the signals map correctly within the expected range.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52600400085304,"sku":"DS200TCQAG1BB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCQAG1BB1.jpg?v=1783066770","url":"https:\/\/www.automodulexpert.com\/products\/ge-ds200tcqag1bb-tc2000-common-analog-i-o-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}