{"product_id":"ge-ds3800xtfp-thyristor-fan-out-board","title":"GE DS3800XTFP Thyristor Fan Out Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE DS3800XTFP\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS3800XTFP\u003c\/strong\u003e Thyristor Fan Out Board, operates as a dedicated hardware component for analog signal conditioning and processing within Mark IV (MKIV) Speedtronic turbine control systems. The module provides direct physical and electrical execution of signal distribution required for thyristor control logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS3800XTFP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark IV card form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e+5 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eAnalog Signal Conditioning\/Processing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Type\u003c\/td\u003e\n\u003ctd\u003eHigh-density board-to-board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control Backplane Integration\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGE DS3800XTFP\u003c\/strong\u003e utilizes the Mark IV backplane bus to facilitate deterministic signal processing across the control rack architecture. Optimal performance is achieved by maintaining firmware flash compatibility with the host processor, ensuring that the analog signal distribution is synchronized with the system's global scan rate. I\/O density scaling must be monitored to prevent excessive load on the backplane power distribution. Users must verify that the backplane bus communication velocity settings are tuned to account for the signal processing latency inherent in the thyristor control loop.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the DS3800XTFP be replaced while the system is under power?\u003c\/p\u003e\n\u003cp\u003eA: No. The backplane interface is not designed for hot-swapping. The control rack must be de-energized to prevent electrical faults or damage to the module pins during extraction or insertion.\u003c\/p\u003e\n\u003cp\u003eQ: What precautions are necessary for the high-density board-to-board connectors?\u003c\/p\u003e\n\u003cp\u003eA: Ensure that the connectors are clean and free of oxidation. When seating the board, apply uniform pressure to prevent pin misalignment or bending, which could cause intermittent signal loss in the thyristor control path.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower Isolation: Disconnect all power sources from the cabinet to ensure a safe environment before handling the module.\u003c\/li\u003e\n\u003cli\u003eMounting: Secure the board into the designated rack slot, ensuring the board-to-board connectors are correctly aligned. Tighten all mounting hardware to ensure firm contact with the rack chassis.\u003c\/li\u003e\n\u003cli\u003eSignal Verification: Once installed, ensure all auxiliary cabling is properly routed and secured to prevent vibration-induced mechanical stress on the board.\u003c\/li\u003e\n\u003cli\u003eGrounding: Verify that the chassis ground connection is solid. Terminate cable shields according to standard industrial practices to prevent noise injection into the analog signal path.\u003c\/li\u003e\n\u003cli\u003eVerification: Power the system and monitor the diagnostic interface to confirm that the thyristor control signals are processing within the expected operating range.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52600424431928,"sku":"DS3800XTFP","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS3800XTFP2.jpg?v=1783066769","url":"https:\/\/www.automodulexpert.com\/products\/ge-ds3800xtfp-thyristor-fan-out-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}