The GE Fanuc A20B-8101-0220, also cataloged as the A20B-8101 DeviceNet Master PCB, operates as a dedicated hardware component for high-speed deterministic bus communication and I/O exchange within Series 0i/0i-Mate CNC control chassis platforms. It manages real-time fieldbus data transfer, slave node configuration, and backplane register updates, executing cyclic parameter polling across industrial automation axes without introducing processor interrupt delay.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | A20B-8101-0220 |
| Brand | GE Fanuc |
| Origin | Japan |
| Weight | 1.00 kg |
| Dimensions | 100 mm x 80 mm x 20 mm |
| Operating Temp | -40 to 70 deg C |
| Power Consumption | 24 VDC nominal |
| Board Type | DeviceNet Master Communication Daughterboard |
| System Compatibility | Fanuc Series 0i / 0i Mate Model D / CNC Control Rack |
| Fieldbus Interface | DeviceNet ISO 11898 CAN physical layer |
| Backplane Bus | Direct CNC motherboard connector interface |
Industrial Network and Firmware Compatibility
The GE Fanuc A20B-8101-0220 maintains high backplane bus communication velocity across deterministic networks, supporting EtherNet/IP, Profinet, and DeviceNet protocols for seamless I/O density scaling. Integrated firmware flash compatibility guarantees real-time synchronisation between physical CAN-bus transceiver circuits and the main CNC CPU memory map. Internal channel-to-channel signal routing isolates fieldbus transients, preserving control loop stability during high-speed data acquisition routines.
Frequently Asked Questions
Q: What is the primary functional difference between the A20B-8101-0220 and the A20B-8101-0330 boards?
A: The A20B-8101-0220 acts as a DeviceNet Master interface board for controlling remote I/O drops, whereas the A20B-8101-0330 operates strictly in DeviceNet Slave mode within the Fanuc CNC architecture.
Q: Are there special precautions required when hot-swapping this PCB from the CNC motherboard?
A: The A20B-8101-0220 does not support live hot-swapping. System logic power (24 VDC) and main drive power to the CNC rack must be fully isolated before removing or seating the board onto the backplane bus connector.
Q: How are network baud rates and node addresses configured on this module?
A: Node MAC IDs and transmission speeds (125 kbps, 250 kbps, or 500 kbps) are set via system parameter screens on the CNC display unit or through onboard hardware DIP switch arrays prior to bus commissioning.
Field Installation Guidelines
- Disconnect all primary power feeds to the CNC control cabinet and wait at least 5 minutes to allow internal power supply capacitors to discharge completely.
- Wear a grounded electrostatic discharge (ESD) wrist strap connected to the cabinet chassis ground before handling the circuit board.
- Align the daughterboard card edge connectors with the designated option slot on the main Fanuc CNC motherboard and press firmly until fully seated.
- Secure all mechanical retention screws to maintain solid ground continuity through the board standoffs and prevent vibration-induced loosening.
- Terminate the DeviceNet trunk line at both physical ends with 120-ohm, 1/4-watt resistors across the CAN_H and CAN_L signal lines before applying 24 VDC power.
| Quick Quotes | Receive price & availability FAST from our dedicated customer service team. |
|---|---|
| Delivery | Expedited, Freight, And International Shipping Available. |
| Condition | 100% New with Original Package |
| Payment | We accept American Express, Discover, MasterCard, PayPal, and Visa. Our site is secured by RapidSSL. |
| Shipping Port | ShangHai, Xiamen |
| Warranty | 12 Months |
| Q: Is Our Pricing Competitive? |
| A: Yes, we collaborate with over 50 countries worldwide. As a top supplier in China, we offer significant discounts based on market trends. |
| Q: What Is the Warranty Period? |
| A: All our new and original products come with a standard one-year warranty. |
| Q: What Payment Methods Do We Accept? |
| A: We require 100% T/T (Telegraphic Transfer) payment before shipping. For items with a lead time, a 30% deposit is needed upfront, and the remaining 70% is due before shipping. If you have a representative in China, you can arrange an RMB transfer through them. |
| Q: What Shipping Methods Do We Use? |
| A: We primarily use FedEx, DHL, UPS, and BRE for shipping. If you have an account with any of these carriers, you can handle shipping directly. We also offer free shipping to China-based freight forwarders. |
| Q: What Is Our Delivery Time? |
| A: Delivery usually takes 1-3 days after receiving the initial payment. For items with a lead time, shipping will occur according to the specified schedule. |
| Q: How Do We Package the Goods? |
| A: We ensure safe packaging with multiple layers of protection. Products are first placed in their original boxes and sealed with labels. A layer of bubble wrap is then added for collision protection during transit. Finally, the items are packed securely in durable boxes. |
| Q: How Can Customers Contact Us and Request a Quote? |
| A: You can reach out to us via email, WhatsApp, WeChat, Skype, or your preferred communication platform. Contact us with your needs, and we'll provide a prompt, customized quote. |
Recently Viewed
Express Shipping
Extensive Inventory
Quality Assurance
