{"product_id":"ge-fanuc-ds200tbcbg1azz-turbine-control-board","title":"GE Fanuc DS200TBCBG1AZZ Turbine Control Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE Fanuc DS200TBCBG1AZZ\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TBCBG1AZZ\u003c\/strong\u003e Turbine Control Board, operates as a dedicated hardware component for high-speed signal processing and turbine regulation within Speedtronic Mark V system platforms. This module executes real-time turbine speed and load regulation by processing discrete and analog feedback signals through a 10 ms control loop. The board serves as a primary interface for gathering field data, ensuring deterministic monitoring and control logic execution across the turbine management architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TBCBG1AZZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE Fanuc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e190 mm x 130 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e24 VDC nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessing Cycle\u003c\/td\u003e\n\u003ctd\u003e10 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Channels\u003c\/td\u003e\n\u003ctd\u003e16 discrete inputs, 8 analog inputs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eIndustrial Control and Backplane Communication\u003c\/h3\u003e\n\u003cp\u003eThe DS200TBCBG1AZZ utilizes a proprietary Mark V bus protocol to maintain deterministic communication across the backplane. The module is engineered for I\/O density scaling, allowing for the integration of multiple sensor types into the Speedtronic environment. Backplane bus communication velocity is optimized to ensure that the 10 ms processing cycle is maintained without signal degradation. Firmware flash compatibility is supported to allow for system-wide logic updates, ensuring the board remains synchronized with the master control processor.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the DS200TBCBG1AZZ be used to replace earlier board iterations within the same Mark V system?\u003c\/p\u003e\n\u003cp\u003eA: Compatibility depends on the specific firmware version and backplane configuration. Always verify that the hardware revision and system logic files support the current board iteration before installation.\u003c\/p\u003e\n\u003cp\u003eQ: How should the 24 VDC power supply be verified to prevent logic errors?\u003c\/p\u003e\n\u003cp\u003eA: Ensure the nominal 24 VDC input is regulated and filtered to prevent ripple interference, which can cause erratic analog-to-digital conversion within the high-speed processing loops.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the Mark V cabinet power is isolated and locked out.\u003c\/li\u003e\n\u003cli\u003eVerify the Eurocard alignment before insertion; ensure the card guides are clear of debris to prevent mechanical binding.\u003c\/li\u003e\n\u003cli\u003eGently slide the board into the backplane slot until the front-panel connectors are fully seated and the retention hardware is secured.\u003c\/li\u003e\n\u003cli\u003eTerminate all discrete and analog signal cabling to the corresponding terminal blocks. Ensure all cable shields are grounded at the cabinet entry point to mitigate EMI.\u003c\/li\u003e\n\u003cli\u003ePerform a visual inspection of all edge connectors for secure engagement.\u003c\/li\u003e\n\u003cli\u003eUpon power restoration, verify the module status via the Mark V operator interface to confirm communication with the control engine.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52613993660728,"sku":"DS200TBCBG1AZZ","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TBCBG1A.jpg?v=1783323904","url":"https:\/\/www.automodulexpert.com\/products\/ge-fanuc-ds200tbcbg1azz-turbine-control-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}