{"product_id":"ge-is210mvrfh1a-interface-board","title":"GE IS210MVRFH1A Interface Board","description":"\u003cp\u003eThe \u003cstrong\u003eGE IS210MVRFH1A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS210MVRFH1A\u003c\/strong\u003e Interface Board, operates as a dedicated hardware component for high-speed digital signal processing and bus interfacing within GE control system architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS210MVRFH1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.35kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e6U VME form factor, 0.787 inch wide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to +65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProcessor\u003c\/td\u003e\n\u003ctd\u003eTMS320C32\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Type\u003c\/td\u003e\n\u003ctd\u003eVME Interface Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eIS210MVRFH1A\u003c\/strong\u003e utilizes a VME bus architecture to facilitate data exchange between the onboard TMS320C32 processor and the host system backplane. Backplane bus communication velocity is constrained by the VME standard timings assigned to the specific slot allocation. Firmware flash compatibility is managed via the host processor interface; operators must verify that the loaded kernel image aligns with the hardware revision level of the board to prevent bus synchronization errors or processor exceptions during power-up sequences.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can this VME board be hot-swapped while the VME backplane is under power?\u003c\/p\u003e\n\u003cp\u003eA: No. The VME backplane standard does not natively support hot-insertion or removal for this module type. Removing or inserting the board while the backplane is energized risks electrical damage to the bus drivers and potential corruption of the backplane communication.\u003c\/p\u003e\n\u003cp\u003eQ: What is the significance of the 0.787 inch width specification?\u003c\/p\u003e\n\u003cp\u003eA: This dimension defines the physical slot occupancy within a standard VME chassis. It must be strictly observed to ensure proper mechanical seating and clearance from adjacent modules, preventing overheating due to blocked airflow paths.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the entire VME chassis before attempting to install or remove the module.\u003c\/li\u003e\n\u003cli\u003eAlign the board with the upper and lower guide rails of the designated VME slot, ensuring the board edge connectors are properly oriented toward the backplane.\u003c\/li\u003e\n\u003cli\u003eSlide the board forward until the connectors engage; push the front panel levers firmly to lock the module into the backplane, ensuring a secure electrical connection.\u003c\/li\u003e\n\u003cli\u003eTighten the front panel mounting screws to the chassis to ensure mechanical stability and proper grounding through the chassis frame.\u003c\/li\u003e\n\u003cli\u003eVerify that no adjacent modules are physically obstructing the heat dissipation area of the \u003cstrong\u003eIS210MVRFH1A\u003c\/strong\u003e, as airflow is necessary to maintain the board within its -30 deg C to +65 deg C operating range.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52545852735800,"sku":"IS210MVRFH1A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200VTCCH1CBD.jpg?v=1781679434","url":"https:\/\/www.automodulexpert.com\/products\/ge-is210mvrfh1a-interface-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}