{"product_id":"general-electric-ds200adpbg1abb-genius-i-o-adapter-board","title":"General Electric DS200ADPBG1ABB Genius I\/O Adapter Board","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200ADPBG1ABB\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200ADPBG1ABB\u003c\/strong\u003e Genius I\/O Adapter Board, operates as a dedicated hardware component for relay-based signal distribution within Genius I\/O network platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS200\u003c\/strong\u003e: Indicates the industrial drive control assembly series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADPB\u003c\/strong\u003e: Specifies the Genius I\/O adapter board function with relay integration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG1\u003c\/strong\u003e: Denotes the hardware generation or revision level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABB\u003c\/strong\u003e: Defines the specific technical iteration and board layout version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200ADPBG1ABB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e15.9 cm x 17.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to +65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e+5 V DC, 6 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRelay Channels\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Voltage\u003c\/td\u003e\n\u003ctd\u003e28 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200ADPBG1ABB\u003c\/strong\u003e utilizes surface mount technology to maintain compact I\/O density scaling on the host backplane. It requires strict adherence to deterministic backplane bus communication velocity to ensure the 12 relay channels respond within the scan time of the Genius I\/O network. Firmware flash compatibility is managed via the master controller interface; technicians must confirm the host backplane supports the G1 hardware revision before deployment. The board is designed to interface directly with 28 V DC supply voltages to drive the onboard relay logic without requiring external signal conversion.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can the onboard relays be individually controlled via the Genius network?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The board is mapped as an I\/O adapter on the Genius network, allowing the host controller to address each of the 12 relay channels independently.\u003c\/p\u003e\n\u003cp\u003eQ: Is this board capable of hot-swapping?\u003c\/p\u003e\n\u003cp\u003eA: Hot-swapping is not supported. The backplane power must be fully isolated before installing or removing the board to prevent electrical transient damage to the surface mount components.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the DIN-rail is securely mounted and grounded. Verify that the system is de-energized to prevent short circuits during terminal connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Snap the board onto the standard DIN-rail. Ensure the locking mechanism is engaged for long-term vibration resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Terminate signal wiring to the 12 relay channel terminals. Maintain proper separation between high-voltage relay outputs and low-voltage control signals to prevent crosstalk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connection\u003c\/strong\u003e: Provide a stable +5 V DC, 6 A source to the logic power inputs. Ensure the 28 V DC supply is connected to the appropriate relay common pins.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrounding\u003c\/strong\u003e: Connect the board chassis ground to the cabinet common ground point using a low-impedance braided strap to protect against surge voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: After power-up, verify that the diagnostic status indicators on the board signal normal network communication.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52570064945464,"sku":"DS200ADPBG1ABB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200ADPBG1ABB2.jpg?v=1782459428","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200adpbg1abb-genius-i-o-adapter-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}