{"product_id":"general-electric-ds200ctbag1acb-analog-termination-module","title":"General Electric DS200CTBAG1ACB Analog Termination Module","description":"\u003cp\u003eConfigured for signal termination and power distribution in Mark V control systems, the \u003cstrong\u003eGeneral Electric DS200CTBAG1ACB\u003c\/strong\u003e (\u003cstrong\u003eDS200CTBAG1ACB\u003c\/strong\u003e Analog Termination Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DS200CTBAG1ACB is a specific hardware revision within the CTBA termination series. This unit is physically and electrically keyed for installation in the R5 core of the Mark V system. The suffix \"G1ACB\" denotes the board configuration for mixed-signal routing, including shaft voltage\/current monitoring and dedicated bus interface logic. There are no user-configurable sub-variants for this catalog number.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200CTBAG1ACB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e100 mm x 80 mm x 20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-40 deg C to +70 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Voltage\u003c\/td\u003e\n\u003ctd\u003e24 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Protocol\u003c\/td\u003e\n\u003ctd\u003eModbus TCP\/IP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Location\u003c\/td\u003e\n\u003ctd\u003eR5 core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200CTBAG1ACB\u003c\/strong\u003e integrates into the R5 core architecture to facilitate deterministic communication via IONET and COREBUS pathways. The module maintains high-speed data flow for 4-20 mA signal loops and shaft-specific telemetry, ensuring that the control system receives precise feedback for turbine regulation. Firmware flash compatibility is governed by the system's core configuration; mismatches in the board's interface logic can induce communication latencies or network synchronization faults. The board employs a robust bus architecture to handle concurrent Modbus TCP\/IP traffic and power monitoring interfaces without degrading signal integrity across the designated communication channels.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this termination module be installed in any core of the Mark V rack?\u003c\/p\u003e\n\u003cp\u003eA: No. The DS200CTBAG1ACB is engineered specifically for the R5 core. Installation in an incorrect core slot will lead to signal routing errors and a failure to establish communication with the control processor.\u003c\/p\u003e\n\u003cp\u003eQ: How are the shaft voltage and current signals protected from noise?\u003c\/p\u003e\n\u003cp\u003eA: The board utilizes integrated signal conditioning pathways designed to minimize the impact of electromagnetic interference on sensitive shaft telemetry; however, strict adherence to shielded cabling practices at the terminal block is required for full noise suppression.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Insert the module into the designated R5 core slot, ensuring full engagement with the backplane connectors. Secure the module to the chassis to maintain electrical ground continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Wiring\u003c\/strong\u003e: Terminate all 4-20 mA inputs and shaft sensor cables at the designated terminals. Ensure wiring is routed away from high-current power cables to prevent crosstalk.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding\u003c\/strong\u003e: Terminate cable shields at the cabinet earth ground bar. Shield integrity is mandatory for IONET and COREBUS cables to maintain deterministic bus communication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: Upon installation, verify communication link activity via the system diagnostic software to ensure the Modbus TCP\/IP interface is correctly mapped and active within the R5 core logic.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52596621541688,"sku":"DS200CTBAG1ACB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200CTBAG1ACB2.jpg?v=1782980863","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200ctbag1acb-analog-termination-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}