{"product_id":"general-electric-ds200lppag1aba-line-protection-board","title":"General Electric DS200LPPAG1ABA Line Protection Board","description":"\u003cp\u003eConfigured for signal monitoring and circuit protection in Mark V control platforms, the \u003cstrong\u003eGeneral Electric DS200LPPAG1ABA\u003c\/strong\u003e (\u003cstrong\u003eDS200LPPAG1ABA\u003c\/strong\u003e Line Protection Board) provides direct physical\/electrical execution for safeguarding control loops against overvoltage and line-side faults.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DS200LPPAG1ABA utilizes a specific alphanumeric coding system to denote hardware revision and functional capability. The \"LPPA\" identifier identifies the board as the Line Protection component, while the \"G1ABA\" suffix indicates the baseline hardware iteration, PCB revision, and assembly group specifically optimized for Mark V line-side monitoring and fault detection logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200LPPAG1ABA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.8kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eStandard Mark V PCB form factor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDetermined by system bus load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Function\u003c\/td\u003e\n\u003ctd\u003eLine-side protection and signal monitoring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe DS200LPPAG1ABA maintains electrical integrity by suppressing transients that could otherwise propagate through the control backplane. By isolating the line-side interface from the deterministic bus, the board ensures that communication between the control processor and I\/O modules remains undisturbed by external electrical noise or line faults. This protection maintains deterministic data flow, preventing timing jitter and ensuring that the turbine control system operates within its required scan cycle parameters.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this board be hot-swapped during turbine operation?\u003c\/p\u003e\n\u003cp\u003eA: No, the DS200LPPAG1ABA does not support live insertion. Removing or installing the module while the backplane is energized risks damage to the connector pins and internal protection circuitry due to potential voltage transients.\u003c\/p\u003e\n\u003cp\u003eQ: How is the fault status communicated to the control processor?\u003c\/p\u003e\n\u003cp\u003eA: The board monitors voltage levels and fault conditions, providing status signals through backplane interface lines. These signals are read by the system controller to determine the operational status of the monitored protection loop.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePerform a complete system shutdown and verify that rack power is de-energized using a calibrated voltmeter.\u003c\/li\u003e\n\u003cli\u003eInspect the backplane slot for any obstructions or bent pins before inserting the module.\u003c\/li\u003e\n\u003cli\u003eSlide the DS200LPPAG1ABA into the designated card guides, ensuring uniform alignment with the backplane connector.\u003c\/li\u003e\n\u003cli\u003eSeat the module firmly and secure the front faceplate screws to the rack frame; this connection is necessary for maintaining the board's chassis ground path.\u003c\/li\u003e\n\u003cli\u003eVerify all field wiring connections are secure. Ensure that any line-side shielding is terminated at the designated grounding bus to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eObserve the board during initial power-up to confirm that no fault indicators are triggered, ensuring the protection circuitry is correctly initialized within the system.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52592674636088,"sku":"DS200LPPAG1ABA","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200LPPAG1ABA2.jpg?v=1782892601","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200lppag1aba-line-protection-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}