{"product_id":"general-electric-ds200lrpag1agf-line-protection-printed-circuit","title":"General Electric DS200LRPAG1AGF Line Protection Printed Circuit","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200LRPAG1AGF\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200LRPAG1AGF\u003c\/strong\u003e I\/O Pack, operates as a dedicated hardware component for signal processing and line protection within industrial control and turbine management platforms.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS200\u003c\/strong\u003e: Designates the industrial control assembly series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLRPA\u003c\/strong\u003e: Specifies the Line Protection functional designation and I\/O Pack architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG1\u003c\/strong\u003e: Denotes the hardware generation or revision level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAGF\u003c\/strong\u003e: Defines the specific technical iteration and board layout version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200LRPAG1AGF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e12.2 cm x 8.2 cm x 6.0 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on backplane bus load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eI\/O Pack \/ Line Protection PCB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200LRPAG1AGF\u003c\/strong\u003e functions as an intelligent node within the control rack, requiring deterministic backplane bus communication velocity to process I\/O data streams and execute line protection logic. Firmware flash compatibility is governed by the host controller's master software revision; technicians must verify that the backplane back-end supports the G1 hardware iteration before deployment. The module performs high-speed signal conditioning and I\/O density scaling, ensuring that line protection parameters are monitored and transmitted with minimal latency to the master processor.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can this I\/O pack be hot-swapped during active system operation?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping is not supported. The control rack must be completely de-energized to prevent electrical faults or damage to the backplane connector pins during module installation or removal.\u003c\/p\u003e\n\u003cp\u003eQ: How is the line protection threshold configured?\u003c\/p\u003e\n\u003cp\u003eA: Threshold parameters are defined within the controller's software logic. The I\/O pack receives these instructions via the backplane bus to perform real-time monitoring and trigger protection sequences if limits are exceeded.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the control rack is completely isolated from the main power source. Utilize an anti-static wrist strap to protect the module components from electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Align the \u003cstrong\u003eDS200LRPAG1AGF\u003c\/strong\u003e with the rack guide rails. Slide the unit until the backplane connectors are fully seated and engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Fastening\u003c\/strong\u003e: Secure the module faceplate to the rack chassis using the integrated screws to ensure structural integrity and reliable electrical grounding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Wiring\u003c\/strong\u003e: If applicable, ensure all field signal cables are properly routed and terminated. Use shielded, twisted-pair cabling to minimize electromagnetic interference within the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: After installation, perform a final visual inspection of all connections. Energize the system and observe the diagnostic LEDs to confirm the module is initialized and communicating with the host processor.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52570223968568,"sku":"DS200LRPAG1AGF","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200LRPAG1AGF.jpg?v=1782459431","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200lrpag1agf-line-protection-printed-circuit","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}