{"product_id":"general-electric-ds200sdcig2agb-dc-power-supply-and-instrumentation-board","title":"General Electric DS200SDCIG2AGB DC Power Supply and Instrumentation Board","description":"\u003cp\u003eConfigured for power supply regulation and instrumentation signal management in Mark V Speedtronic control platforms, the \u003cstrong\u003eGeneral Electric DS200SDCIG2AGB\u003c\/strong\u003e (\u003cstrong\u003eDS200SDCIG2AGB\u003c\/strong\u003e Power Supply \/ Instrumentation PCB) provides direct physical\/electrical execution for logic-level power distribution and system monitoring.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DS200SDCIG2AGB utilizes a structured manufacturing identifier to denote hardware configuration. The \"SDCI\" functional acronym identifies the board as a Power Supply and Instrumentation unit. The \"G2AGB\" suffix delineates specific revision history, where \"A\" denotes the first revision, \"G\" the second revision, and \"B\" the artwork version, ensuring compatibility with legacy DC2000 drive systems and standard Mark V control architectures.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200SDCIG2AGB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.36 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.2 cm x 12.2 cm x 6 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to +60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDetermined by system bus load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Function\u003c\/td\u003e\n\u003ctd\u003ePower supply and instrumentation signal routing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe DS200SDCIG2AGB integrates into the control backplane to provide stable logic-level voltages necessary for deterministic communication. By regulating power delivery to instrumentation circuits, the board prevents voltage sags that could introduce timing jitter into the control bus. This stability ensures that the communication between the board and the host controller remains within established velocity parameters, allowing for accurate monitoring of turbine performance data without signal degradation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this board be hot-swapped while the turbine control system is online?\u003c\/p\u003e\n\u003cp\u003eA: No, the DS200SDCIG2AGB does not support hot-swapping. The system rack power must be de-energized to prevent electrical transients or arcing on the PCB edge connectors during installation or removal.\u003c\/p\u003e\n\u003cp\u003eQ: How does this board interface with the DC2000 drive system?\u003c\/p\u003e\n\u003cp\u003eA: The board provides dedicated instrumentation and power signal paths that align with the DC2000 interface specifications. Users must verify that ribbon cables and terminal connections are properly seated according to the system wiring diagram to ensure consistent signal feedback.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePerform a total power isolation on the Mark V control rack and verify the absence of voltage at the terminal blocks using a calibrated meter.\u003c\/li\u003e\n\u003cli\u003eAlign the DS200SDCIG2AGB with the card guides in the designated rack slot, ensuring no force is applied to adjacent modules.\u003c\/li\u003e\n\u003cli\u003eSeat the board firmly into the backplane connector. Fasten the front plate to the chassis to maintain secure electrical bonding and grounding.\u003c\/li\u003e\n\u003cli\u003eVerify all instrumentation signal connections are clean and tight. Ensure that cable shields are properly landed to the designated ground bus to minimize noise pickup.\u003c\/li\u003e\n\u003cli\u003eConfirm that cabinet environmental conditions remain within the 0 deg C to +60 deg C operating range to ensure the longevity of the board circuitry.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52592672440632,"sku":"DS200SDCIG2AGB","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200SDCIG2AGB2.jpg?v=1782892600","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200sdcig2agb-dc-power-supply-and-instrumentation-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}