{"product_id":"general-electric-ds200tbqbg1aaa-tc2000-common-analog-i-o-board","title":"General Electric DS200TBQBG1AAA TC2000 Common Analog I\/O Board","description":"\u003cp\u003eAThe \u003cstrong\u003eGeneral Electric DS200TBQBG1AAA\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200TBQBG1\u003c\/strong\u003e TC2000 Common Analog I\/O Board, operates as a dedicated hardware component for signal processing and interface execution within Mark V control platforms. The module manages incoming and outgoing 4-20 mA analog signals, providing physical connection points for sensor feedback and control command output via the R5 core architecture.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TBQBG1AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUnited States\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.45 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28 cm x 18 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on 4-20 mA loop load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInput Signal Types\u003c\/td\u003e\n\u003ctd\u003e4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Signal Types\u003c\/td\u003e\n\u003ctd\u003e4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Location\u003c\/td\u003e\n\u003ctd\u003eR5 Core\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Connector\u003c\/td\u003e\n\u003ctd\u003e3PL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Connectors\u003c\/td\u003e\n\u003ctd\u003eJAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Firmware Integrity\u003c\/h3\u003e\n\u003cp\u003eThe TC2000 Common Analog I\/O board interfaces directly with the Mark V backplane bus to facilitate real-time data transmission between the field instrumentation and the controller processor. Signal integrity is maintained through the 3PL communication interface, ensuring deterministic data exchange. Firmware flash compatibility is managed via the controller environment; ensure the current Mark V system software revision is verified against the hardware ID of the DS200TBQBG1AAA before integration to prevent bus communication latency or initialization errors during power-up sequences.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this module capable of hot-swap operation while the Mark V system is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. The DS200TBQBG1AAA is not designed for hot-swapping. The host rack must be de-energized to prevent electrical shorts on the backplane or corruption of I\/O data registers during module removal or insertion.\u003c\/p\u003e\n\u003cp\u003eQ: What are the requirements for the JAA output connectors regarding shielding?\u003c\/p\u003e\n\u003cp\u003eA: All field wiring connected to JAA terminals must utilize twisted-pair shielded cabling. The shield should be grounded at the controller cabinet end only to prevent ground loop currents from injecting noise into the 4-20 mA loops.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the R5 core power supply is isolated before beginning installation.\u003c\/li\u003e\n\u003cli\u003eVerify that the mounting surface within the R5 core is free of metallic debris to prevent short circuits on the rear of the PCB.\u003c\/li\u003e\n\u003cli\u003eAlign the module with the designated slot guides and ensure the 3PL connector seats fully into the backplane receptacle without excessive force.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the provided chassis mounting points to maintain vibration resistance during operation.\u003c\/li\u003e\n\u003cli\u003eConnect field wiring to the JAA terminals, ensuring that individual wire strands are fully contained within the terminal blocks to avoid intermittent signal behavior.\u003c\/li\u003e\n\u003cli\u003eVerify loop resistance for the 4-20 mA circuits remains within the specified operating range of the Mark V I\/O processor before system startup.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52619878662456,"sku":"DS200TBQBG1AAA","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TBQBG1AAA1.jpg?v=1783497528","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200tbqbg1aaa-tc2000-common-analog-i-o-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}