{"product_id":"general-electric-ds200tbqcg1aaa-analog-input-termination-module","title":"General Electric DS200TBQCG1AAA Analog Input Termination Module","description":"\u003cp\u003eConfigured for signal termination and management in Mark V control systems, the \u003cstrong\u003eGeneral Electric DS200TBQCG1AAA\u003c\/strong\u003e (\u003cstrong\u003eDS200TBQCG1AAA\u003c\/strong\u003e Analog Input Termination Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DS200TBQCG1AAA is a designated Analog Input Termination Module (TBQC) designed for fixed-position integration within the Mark V rack architecture. The model is specifically engineered for placement in position nine of cores R1, R2, and R3. No sub-variants or alternative suffix versions of this part number exist for standard operational use.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200TBQCG1AAA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.58kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCore Function\u003c\/td\u003e\n\u003ctd\u003eAnalog input signal management\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Location\u003c\/td\u003e\n\u003ctd\u003ePosition nine (cores R1, R2, R3)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200TBQCG1AAA\u003c\/strong\u003e functions as the primary physical termination point for incoming analog loops. The module ensures deterministic signal integrity between field-level sensors and the Mark V core processing units. Communication velocity across the interface is maintained through high-conductivity copper traces and robust terminal interfaces, facilitating real-time data acquisition required for precise turbine monitoring. Firmware flash compatibility is not applicable to this termination module; however, physical alignment within the rack is critical to maintain backplane bus contact and ensure the I\/O core registers the analog signals without impedance mismatches.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can this termination module be installed in positions other than location nine?\u003c\/p\u003e\n\u003cp\u003eA: No. The DS200TBQCG1AAA is physically and electrically mapped for position nine in cores R1, R2, and R3. Installation in unauthorized rack slots will result in incorrect signal routing and system communication failures.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module capable of providing galvanic isolation for analog signals?\u003c\/p\u003e\n\u003cp\u003eA: No. The TBQC module is a termination interface; galvanic isolation must be verified at the field device level or through upstream isolation hardware before the signals reach the termination module.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Seat the module securely into the designated rack slot at position nine. Ensure the backplane connector is fully engaged to establish a low-resistance path for analog signals.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Connect analog input wiring to the terminal blocks with consistent torque to prevent loose connections, which can introduce signal noise or drift in the input readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding\u003c\/strong\u003e: Terminate all signal cable shields to the cabinet ground bus. Ensure the shield continuity is maintained through the termination point to minimize electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental\u003c\/strong\u003e: Keep the terminal area free of moisture and contaminants. Corrosion on the terminal blocks can increase resistance, leading to errors in the analog input values processed by the Mark V core.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52596608565560,"sku":"DS200TBQCG1AAA","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TBQCG1AAA2.jpg?v=1782980859","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200tbqcg1aaa-analog-input-termination-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}