{"product_id":"general-electric-ds200udsag1add-excitation-board","title":"General Electric DS200UDSAG1ADD Excitation Board","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS200UDSAG1ADD\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS200UDSAG1\u003c\/strong\u003e Excitation Board, operates as a dedicated hardware component for SCR-based field excitation and voltage regulation within drive and control systems. The module processes analog feedback to modulate gate signals, managing high-current output to electrical fields while maintaining precise control loop synchronization.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS200UDSAG1ADD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e1.1 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e26 cm x 18 cm x 5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e15 W (nominal control power)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e125 VDC +\/- 20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExcitation Output\u003c\/td\u003e\n\u003ctd\u003e5 A continuous, 10 A peak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSCR Channels\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnergy Storage\u003c\/td\u003e\n\u003ctd\u003e470 uF at 200 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP deterministic networks\u003c\/h3\u003e\n\u003cp\u003eThe DS200UDSAG1ADD is designed for integration into deterministic control architectures. The board utilizes high-speed gate logic to ensure that firing sequences remain synchronized with the main controller scan cycle. Firmware flash compatibility ensures that the module logic remains aligned with system-level updates, facilitating consistent network performance without signal jitter. The opto-isolated gate drivers provide the necessary isolation required for high-velocity bus communication and precise SCR triggering in demanding industrial control loops.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the DS200UDSAG1ADD be used in a redundant control configuration?\u003c\/p\u003e\n\u003cp\u003eA: Yes, the module is designed for compatibility with standard redundant excitation schemes. However, when operating in parallel, users must ensure that feedback signal scaling is calibrated identically across all modules to prevent circulating currents between excitation channels.\u003c\/p\u003e\n\u003cp\u003eQ: Is the 50-pin ribbon connector prone to mechanical fatigue?\u003c\/p\u003e\n\u003cp\u003eA: The 50-pin ribbon connector is a standard interface for GE drive systems. To prevent pin fatigue or signal intermittent contact, the ribbon cable must be secured with proper strain relief and should not be subjected to vibration or stress after final installation.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the system and verify the discharge of energy storage capacitors before touching the board.\u003c\/li\u003e\n\u003cli\u003eAlign the module within the designated cabinet rack and ensure that the backplane connection is seated firmly before tightening mounting hardware.\u003c\/li\u003e\n\u003cli\u003eInspect the 50-pin ribbon cable for any signs of oxidation or bent pins prior to connecting it to the control interface.\u003c\/li\u003e\n\u003cli\u003eTerminate field wiring at the 8-pin terminal block using appropriate torque specifications to ensure a low-impedance connection.\u003c\/li\u003e\n\u003cli\u003eVerify that all shield grounds for analog feedback inputs are connected to the cabinet ground reference at a single point to prevent ground loop interference.\u003c\/li\u003e\n\u003cli\u003eCheck that the supply voltage (125 VDC) remains within the specified +\/- 20% tolerance range under full load conditions.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52577841512760,"sku":"DS200UDSAG1ADD","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200UDSAG1ADD.jpg?v=1782704790","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds200udsag1add-excitation-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}