{"product_id":"general-electric-ds215dmcbg1azz03a-ios-processor-and-communication-card","title":"General Electric DS215DMCBG1AZZ03A IOS Processor and Communication Card","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS215DMCBG1AZZ03A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS215DMCB\u003c\/strong\u003e IOS Processor and Communication Card, operates as a dedicated hardware component for signal processing and I\/O management within DC2000 control platforms. This module provides direct physical\/electrical execution of 12-channel I\/O operations, regulating analog output current and managing bus-level communications across the system network.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS215DMCBG1AZZ03A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.64kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e8.26 cm x 4.18 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e-30 deg C to 65 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChannels\u003c\/td\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Output\u003c\/td\u003e\n\u003ctd\u003e0-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommon Mode Voltage\u003c\/td\u003e\n\u003ctd\u003e+5 VDC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Frequency\u003c\/td\u003e\n\u003ctd\u003e50 or 60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eDS215DMCBG1AZZ03A\u003c\/strong\u003e serves as a core communication interface within the DC2000 architecture, facilitating data exchange between field-level devices and the primary controller. Deterministic network performance is maintained through high-speed bus communication, ensuring that analog output signals and digital status updates are synchronized with the processor scan cycle. The card's design prioritizes I\/O density scaling, allowing for robust signal handling across the 12 available channels while maintaining signal integrity within the specified +5 VDC common mode range. Firmware flash compatibility ensures that the card can be integrated into diverse system revisions without compromising bus communication velocity.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this card compatible with hot-swapping procedures?\u003c\/p\u003e\n\u003cp\u003eA: No. The DC2000 architecture does not support live module replacement. The system must be fully de-energized to prevent electrical faults and potential damage to the backplane communication pins.\u003c\/p\u003e\n\u003cp\u003eQ: How does the module handle signal isolation for the 0-20 mA outputs?\u003c\/p\u003e\n\u003cp\u003eA: The module is designed to output a precision 0-20 mA signal for process control. Users must ensure that the load impedance connected to these channels remains within the specified limits to maintain output accuracy and prevent thermal stress on the output driver circuits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003ePower down the DC2000 cabinet and execute proper lockout\/tagout (LOTO) protocols before accessing the card cage.\u003c\/li\u003e\n\u003cli\u003eVerify that the slot alignment is correct and that the backplane connectors are free of dust or physical obstruction.\u003c\/li\u003e\n\u003cli\u003eSlide the \u003cstrong\u003eDS215DMCBG1AZZ03A\u003c\/strong\u003e into the assigned rack position, applying firm, even pressure to the faceplate to ensure secure engagement with the backplane bus.\u003c\/li\u003e\n\u003cli\u003eTerminate the I\/O signal wiring to the corresponding terminal blocks, ensuring that all shields are grounded at the cabinet entry point to suppress electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003eInspect the wiring for tight connections and ensure that the 0-20 mA loops are routed away from high-voltage AC cables to minimize crosstalk.\u003c\/li\u003e\n\u003cli\u003eUpon power restoration, verify that the card status indicators show normal operation; consult the system manual for specific LED status diagnostics if initialization fails.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52583681360184,"sku":"DS215DMCBG1AZZ03A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS215DMCBG1AZZ03A.jpg?v=1782804860","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds215dmcbg1azz03a-ios-processor-and-communication-card","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}