{"product_id":"general-electric-ds3800hcmc1a1b-dual-communication-board","title":"General Electric DS3800HCMC1A1B Dual Communication Board","description":"\u003cp\u003eConfigured for high-speed data exchange in industrial control networks, the \u003cstrong\u003eGeneral Electric DS3800HCMC1A1B\u003c\/strong\u003e (\u003cstrong\u003eDS3800HCMC1A1B\u003c\/strong\u003e Dual Communication Board) provides direct physical and electrical execution of multi-channel signal routing and network synchronization.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS3800\u003c\/strong\u003e: Designates the industrial control instrumentation series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHCMC\u003c\/strong\u003e: Specifies the dual communication functional architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1A\u003c\/strong\u003e: Indicates the primary hardware generation level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1B\u003c\/strong\u003e: Defines the specific technical iteration and board layout versioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS3800HCMC1A1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28.8 cm x 7.2 cm x 3.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on bus communication load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eDual Communication Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBackplane Bus and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS3800HCMC1A1B\u003c\/strong\u003e facilitates deterministic communication between the rack-mounted processor and external network nodes. It requires precise backplane bus communication velocity to manage dual-channel data flow without synchronization latency. Firmware flash compatibility is governed by the host system's master revision; users must verify that the backplane back-end supports the 1A hardware iteration before commissioning. The module manages I\/O density scaling by processing dual communication streams, ensuring that network packets are handled and prioritized according to the configured control logic.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can this dual communication board be hot-swapped while the rack is active? A: No. Hot-swapping is not permitted. The system rack must be fully de-energized to prevent electrical faults or damage to the high-density backplane connector pins during installation or removal.\u003c\/p\u003e\n\u003cp\u003eQ: How is the dual-channel communication load balanced on this board? A: Load balancing is managed through onboard logic circuits that distribute data packets between the two channels, ensuring that neither channel exceeds its maximum deterministic bandwidth capacity.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the control rack is isolated from the main power source. Utilize an anti-static wrist strap to protect the board circuitry from electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Align the \u003cstrong\u003eDS3800HCMC1A1B\u003c\/strong\u003e with the rack guide rails. Slide the unit until the backplane connectors are fully engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Fastening\u003c\/strong\u003e: Secure the module faceplate to the rack chassis using the integrated screws to ensure structural integrity and reliable electrical grounding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Wiring\u003c\/strong\u003e: Connect network cables to the dual communication ports, ensuring that cable shielding is properly terminated at the cabinet entry point to reduce electromagnetic interference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: After installation, perform a final visual inspection of all connections. Energize the system and confirm the presence of valid network status signals on the control interface.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52570321584440,"sku":"DS3800HCMC1A1B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS3800HCMC1A1B.jpg?v=1782459406","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds3800hcmc1a1b-dual-communication-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}