{"product_id":"general-electric-ds3800ndac1d1e-analog-output-card","title":"General Electric DS3800NDAC1D1E ANALOG OUTPUT CARD","description":"\u003cp\u003eConfigured for high-precision signal conversion and analog output regulation in GE Speedtronic control systems, the \u003cstrong\u003eGeneral Electric DS3800NDAC1D1E\u003c\/strong\u003e (\u003cstrong\u003eDS3800NDAC1D1E\u003c\/strong\u003e Analog Output Card) provides direct physical\/electrical execution. This hardware component manages the conversion of digital controller signals into proportional voltage or current outputs, facilitating the precise positioning of field actuators and control valves.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS3800NDAC1D1E\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28.8 cm x 7.2 cm x 3.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003e12 W (nominal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Channels\u003c\/td\u003e\n\u003ctd\u003e4-channel analog output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Signal Range\u003c\/td\u003e\n\u003ctd\u003e0-10 VDC \/ 4-20 mA (jumper selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP deterministic networks\u003c\/h3\u003e\n\u003cp\u003eThe DS3800NDAC1D1E leverages internal high-speed backplane bus communication to ensure deterministic signal delivery within the Speedtronic environment. Firmware compatibility and flash memory architecture enable the integration of this module into existing rack configurations without requiring backplane modifications. The module supports real-time data throughput, minimizing signal latency in closed-loop control applications. Throughput timing is synchronized with the main processor scan cycle to maintain signal integrity across deterministic network segments.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the DS3800NDAC1D1E support hot-swapping during system operation?\u003c\/p\u003e\n\u003cp\u003eA: No, this module is not designed for hot-swapping. The control power must be de-energized before removing or inserting the card into the backplane to prevent electrical arcing and potential damage to the bus interface pins.\u003c\/p\u003e\n\u003cp\u003eQ: How is the output signal range configured on this board?\u003c\/p\u003e\n\u003cp\u003eA: Output range configuration (voltage vs. current) is achieved via physical jumpers located on the PCB. Users must verify jumper placement against the specific loop requirements before energizing the control loop to avoid over-range conditions.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the control cabinet is de-energized and follows LOTO (Lockout\/Tagout) procedures before module handling.\u003c\/li\u003e\n\u003cli\u003eVerify that the chassis slot is free of debris and that the backplane connector is aligned with the module's edge connector.\u003c\/li\u003e\n\u003cli\u003eSlide the card into the designated card guide and ensure the latching mechanism is fully engaged to prevent vibration-induced disconnection.\u003c\/li\u003e\n\u003cli\u003eConnect field wiring to the terminal block. Use shielded twisted-pair cabling for all analog signals to minimize electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eGround the cable shield at a single termination point, preferably at the cabinet common reference, to eliminate ground loop currents.\u003c\/li\u003e\n\u003cli\u003eCheck for proper seating by observing the stability of the module within the rack assembly.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52577820967224,"sku":"DS3800NDAC1D1E","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS3800NDAC1D1E.jpg?v=1782704790","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds3800ndac1d1e-analog-output-card","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}