{"product_id":"general-electric-ds3800npse1e1g-power-supply-board","title":"General Electric DS3800NPSE1E1G Power Supply Board","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS3800NPSE1E1G\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS3800NPSE1E1G\u003c\/strong\u003e Power Supply Board, operates as a dedicated hardware component for voltage regulation and power distribution within industrial control networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS3800\u003c\/strong\u003e: Indicates the GE industrial control instrumentation series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNPSE\u003c\/strong\u003e: Specifies the power supply functional designation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1E\u003c\/strong\u003e: Denotes the hardware generation or revision level.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1G\u003c\/strong\u003e: Defines the specific technical iteration and board layout version.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS3800NPSE1E1G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28.8 cm x 7.2 cm x 3.8 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on system load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003ePower Supply Board\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS3800NPSE1E1G\u003c\/strong\u003e facilitates deterministic power delivery across the rack architecture. It requires precise backplane bus communication velocity to maintain stability in voltage supply to peripheral logic circuits. Firmware flash compatibility is managed via the host controller interface; technicians must confirm the host backplane supports the 1E hardware revision before deployment. The board is designed to interface directly with the control rack backplane, ensuring that power signals are regulated and routed to logic circuits without latency or degradation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Can this power supply board be hot-swapped while the system is under load?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping is not supported. The control rack power must be fully isolated before installing or removing the board to prevent electrical transient damage to the backplane pins and board components.\u003c\/p\u003e\n\u003cp\u003eQ: How is the physical connection to the backplane maintained?\u003c\/p\u003e\n\u003cp\u003eA: The board utilizes high-density backplane connectors that provide a secure mechanical and electrical interface, ensuring consistent continuity for DC power distribution circuits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the control rack is completely de-energized. Use an anti-static wrist strap to protect the module from electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Align the \u003cstrong\u003eDS3800NPSE1E1G\u003c\/strong\u003e with the rack guide rails. Ensure the unit is seated firmly so the backplane connectors are fully engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Fastening\u003c\/strong\u003e: Secure the module faceplate to the rack chassis using the integrated screws to ensure structural integrity and proper electrical continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: After installation, perform a final check of all backplane connections. Energize the system and observe the diagnostic LEDs to confirm the module is initialized and routing power to the expected load circuits.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52570335150392,"sku":"DS3800NPSE1E1G","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS3800NPSE1E1G1.jpg?v=1782459430","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds3800npse1e1g-power-supply-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}