{"product_id":"general-electric-ds3820lt4a1c1a-loadtrak-iv-module","title":"General Electric DS3820LT4A1C1A Loadtrak IV Module","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS3820LT4A1C1A\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eDS3820LT4A1C1A\u003c\/strong\u003e Loadtrak IV Module, operates as a dedicated hardware component for motor load monitoring and diagnostic protection within industrial control networks.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDS3820\u003c\/strong\u003e: Indicates the GE industrial monitoring and instrumentation series.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLT4\u003c\/strong\u003e: Specifies the Loadtrak IV functional designation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1C1A\u003c\/strong\u003e: Defines the hardware revision, logic iteration, and circuit configuration level.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDS3820LT4A1C1A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.24 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e3.5 cm x 13.5 cm x 13.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on monitoring load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eLoadtrak IV\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DS3820LT4A1C1A\u003c\/strong\u003e utilizes deterministic backplane bus communication velocity to process motor current data and transmit fault states to the host controller. Firmware flash compatibility is governed by the specific Loadtrak platform version; installers must verify that the host backplane revision supports the A1C1A hardware iteration. The module performs local I\/O density scaling by continuously monitoring incoming current\/voltage signals, ensuring that high-speed transients are captured and reported without latency across the control bus.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Is this module compatible with older versions of the Loadtrak system?\u003c\/p\u003e\n\u003cp\u003eA: Compatibility is strictly determined by the hardware and firmware versioning. Always cross-reference the A1C1A revision against your existing Loadtrak system documentation before deployment.\u003c\/p\u003e\n\u003cp\u003eQ: Can this module be hot-swapped during active motor monitoring?\u003c\/p\u003e\n\u003cp\u003eA: No. Hot-swapping is not supported. The control rack power must be fully isolated before module removal to prevent electrical arcing and damage to the backplane pin array.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation\u003c\/strong\u003e: Ensure the control rack is completely de-energized. Use an anti-static wrist strap to protect the module from electrostatic discharge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting\u003c\/strong\u003e: Align the \u003cstrong\u003eDS3820LT4A1C1A\u003c\/strong\u003e with the rack guide rails. Ensure the unit is seated firmly so the backplane connectors are fully engaged.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanical Fastening\u003c\/strong\u003e: Secure the module faceplate to the rack chassis using the integrated screws to ensure structural integrity and proper electrical continuity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWiring\u003c\/strong\u003e: Connect signal input leads to the terminal blocks, ensuring that current transformer or voltage sensing inputs are wired for correct polarity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding\u003c\/strong\u003e: Use shielded, twisted-pair cabling for all sensing inputs to mitigate the impact of electromagnetic noise within the cabinet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification\u003c\/strong\u003e: After installation, perform a final check of all wiring. Energize the system and observe the diagnostic LEDs to confirm the module is initialized and communicating with the host processor.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52570086211896,"sku":"DS3820LT4A1C1A","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS3820LT4A1C1A2.jpg?v=1782459405","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ds3820lt4a1c1a-loadtrak-iv-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}