{"product_id":"general-electric-dsc200shvig1bhd-scr-high-voltage-interface-board","title":"General Electric DSC200SHVIG1BHD SCR High Voltage Interface Board","description":"\u003cp\u003eConfigured for high-voltage signal attenuation and field current isolation in GE Excitation EX2000 turbine control platforms, the \u003cstrong\u003eGeneral Electric DSC200SHVIG1BHD\u003c\/strong\u003e (\u003cstrong\u003eDSC200SHVIG1BHD\u003c\/strong\u003e SCR High Voltage Interface Board) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe DSC200SHVIG1BHD is categorized as a full-scale SCR High Voltage Interface (SHVI) board. This unit is designed for applications requiring high-voltage monitoring; it is distinct from the SHVM variant, which is restricted to applications with lower DC field voltage ratings. The hardware is designed to interface directly with the DCFB (DC Feedback) board.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eDSC200SHVIG1BHD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.57kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eNot specified\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eSCR voltage interface and shunt isolation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity\u003c\/h3\u003e\n\u003cp\u003eThe \u003cstrong\u003eGeneral Electric DSC200SHVIG1BHD\u003c\/strong\u003e operates by providing attenuation for 3-phase AC bridge voltage and DC bridge voltage signals within the EX2000 system. The board provides critical galvanic isolation for field current shunt signals before these inputs are routed to the DCFB for metering and regulator loop processing. When this interface board is installed, the shunt isolation circuit on the DCFB is bypassed, as the DSC200SHVIG1BHD assumes the primary isolation task. Proper cabling between this interface board and the DCFB is necessary to maintain signal integrity and ensure the control circuits receive calibrated feedback for excitation regulation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Can the DSC200SHVIG1BHD be used as a direct replacement for an SHVM board?\u003c\/p\u003e\n\u003cp\u003eA: No. The SHVM is a reduced-scale version intended for lower-voltage DC field ratings. Installing an SHVI board like the DSC200SHVIG1BHD in a system designed for an SHVM may require configuration changes to the feedback scaling parameters in the regulator control circuitry.\u003c\/p\u003e\n\u003cp\u003eQ: Is field-side isolation maintained if the shunt isolator on the DCFB is bypassed?\u003c\/p\u003e\n\u003cp\u003eA: Yes. The DSC200SHVIG1BHD contains its own dedicated shunt isolator, which provides the necessary galvanic isolation for the field current signals before they reach the feedback metering circuits.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabling\u003c\/strong\u003e: Ensure all connections between the interface board and the DCFB are shielded. Terminate cable shields at the designated EX2000 cabinet ground points to prevent induced noise from affecting regulator accuracy.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage Rating\u003c\/strong\u003e: Confirm that the DC field voltage ratings of the turbine exciter are compatible with the high-voltage specifications of this SHVI board before installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComponent Inspection\u003c\/strong\u003e: Verify that all bridge voltage attenuation paths are free of debris and that there is no evidence of arcing or thermal stress on the high-voltage resistors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance\u003c\/strong\u003e: Since this board handles high-voltage AC and DC signals, ensure that all safety procedures for high-voltage equipment are followed during installation or replacement.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52596549976376,"sku":"DSC200SHVIG1BHD","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/DS200TCCBG8BED2.jpg?v=1782980885","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-dsc200shvig1bhd-scr-high-voltage-interface-board","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}