{"product_id":"general-electric-ic670alg230j-analog-input-module","title":"General Electric IC670ALG230J Analog Input Module","description":"\u003cp\u003eConfigured for precision signal acquisition in Field Control networks, the \u003cstrong\u003eGeneral Electric IC670ALG230J\u003c\/strong\u003e (\u003cstrong\u003eIC670ALG230J\u003c\/strong\u003e Analog Input Module) provides direct physical\/electrical execution.\u003c\/p\u003e\n\u003ch3\u003eSuffix Breakdown \u0026amp; Model Matrix\u003c\/h3\u003e\n\u003cp\u003eThe IC670ALG230J represents a specific hardware revision within the Field Control analog product line. The \"J\" suffix designates the specific iteration of the module, ensuring compatibility with defined firmware versions and backplane configurations.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIC670ALG230J\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.4 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e7.6 cm x 7.6 cm x 10.2 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eBIU backplane dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eAnalog Input Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet and EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IC670ALG230J is engineered for deterministic data integration across Field Control platforms. The module performs high-resolution analog-to-digital conversion, mapping field sensor signals into the internal backplane bus with minimized jitter. Firmware flash compatibility is critical, as the module must be fully recognized by the Bus Interface Unit (BIU) to participate in cyclic I\/O scans. Designers must ensure that the backplane bus communication velocity is correctly configured to match the sampling requirements of the analog inputs to maintain signal integrity during continuous operation.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions (FAQ)\u003c\/h3\u003e\n\u003cp\u003eQ: Does this module require external loop power for 4-20 mA sensors?\u003c\/p\u003e\n\u003cp\u003eA: Depending on the specific configuration and sensor type, external power may be required. Refer to the Field Control installation manual for the specific wiring schematic corresponding to the IC670ALG230J.\u003c\/p\u003e\n\u003cp\u003eQ: Is this module compatible with existing Field Control terminal bases?\u003c\/p\u003e\n\u003cp\u003eA: The IC670ALG230J is designed for standard Field Control mounting hardware. Ensure the module is properly keyed for the chosen terminal base to avoid backplane pin misalignment.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eEnsure the mounting surface and DIN rail are free of debris to prevent mechanical stress on the module housing.\u003c\/li\u003e\n\u003cli\u003eAlign the module carefully with the terminal base to prevent bending the backplane pins during the seating process.\u003c\/li\u003e\n\u003cli\u003eUtilize high-quality shielded twisted-pair cabling for all analog input lines to minimize the influence of electromagnetic interference (EMI).\u003c\/li\u003e\n\u003cli\u003eTerminate shields at a single, low-impedance earth ground point to prevent ground loop currents that could introduce noise into the low-level analog measurements.\u003c\/li\u003e\n\u003cli\u003eVerify that the terminal screws are tightened to the specified torque value to ensure stable signal connectivity throughout the module's operational lifespan.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52624174612792,"sku":"IC670ALG230J","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IC670ALG230J.jpg?v=1783584425","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ic670alg230j-analog-input-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}