{"product_id":"general-electric-is200epdmg1b-exciter-power-distribution-module","title":"General Electric IS200EPDMG1B Exciter Power Distribution Module","description":"\u003cp\u003eConfigured for power distribution and voltage regulation in excitation control systems, the \u003cstrong\u003eGeneral Electric IS200EPDMG1B\u003c\/strong\u003e (\u003cstrong\u003eIS200EPDMG1B\u003c\/strong\u003e Exciter Power Distribution Module) provides direct physical\/electrical execution. This module manages the distribution of excitation power to field windings and auxiliary circuits, ensuring regulated voltage levels required for generator field control and synchronization tasks within the control system platform.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200EPDMG1B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.66 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e33 cm x 12.6 cm x 4 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eStandard industrial ambient range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eApplication dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eExciter Power Distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eBackplane Bus Communication Velocity and Firmware Compatibility\u003c\/h3\u003e\n\u003cp\u003eThe module integrates with the control system backplane to facilitate the transfer of diagnostic telemetry and power status data. Communication velocity across the backplane bus is optimized for real-time monitoring of power distribution loops, ensuring that voltage fluctuations or fault conditions are communicated to the central processor with minimal latency. The internal firmware is designed for compatibility with standard GE control system flash updates, allowing for configuration adjustments within the excitation logic without requiring physical hardware modifications. Proper firmware alignment is required to ensure the module correctly interprets distribution commands and provides accurate feedback regarding output voltage stability.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is the IS200EPDMG1B module capable of hot-swapping while the excitation system is under load? A: No, this module handles primary power distribution functions. Hot-swapping is restricted; the excitation system must be de-energized and verified at zero voltage before the module is removed or installed to prevent arcing and damage to the backplane connectors.\u003c\/p\u003e\n\u003cp\u003eQ: What precautions are necessary for the power distribution bus wiring connected to this module? A: Ensure that all connections use high-temperature, oil-resistant cabling rated for the specific current levels of the exciter field. All lugs must be torqued to manufacturer specifications, and the wiring harness must be supported to prevent mechanical stress on the module terminal blocks.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the excitation system control power is isolated and locked out according to site safety procedures.\u003c\/li\u003e\n\u003cli\u003eInspect the module backplane connector pins for oxidation or damage before attempting installation.\u003c\/li\u003e\n\u003cli\u003eSlide the module into the designated slot, ensuring firm alignment with the internal guides.\u003c\/li\u003e\n\u003cli\u003eTighten the chassis mounting screws to ensure adequate electrical bonding between the module housing and the system ground plane.\u003c\/li\u003e\n\u003cli\u003eVerify that all field power cables are routed via dedicated trays to avoid inductive interference with low-voltage signal control cables.\u003c\/li\u003e\n\u003cli\u003eUpon energization, measure the output voltage at the distribution terminals to confirm alignment with excitation system setpoints before proceeding with full load operation.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52555165892920,"sku":"IS200EPDMG1B","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200EPDMG1B2.jpg?v=1782287372","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-is200epdmg1b-exciter-power-distribution-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}