{"product_id":"general-electric-is200tbaih2c-analog-input-terminal-card","title":"General Electric IS200TBAIH2C Analog Input Terminal Card","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric IS200TBAIH2C\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003eIS200TBAIH2\u003c\/strong\u003e Terminal Card, operates as a dedicated hardware component for analog signal termination and field-to-backplane interface distribution within Mark VI turbine control platforms.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eIS200TBAIH2C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e10 cm x 18 cm x 5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003e0 deg C to 60 deg C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on connected I\/O load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Type\u003c\/td\u003e\n\u003ctd\u003eAnalog Input Terminal Card\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eProfinet \/ EtherNet\/IP Deterministic Networks\u003c\/h3\u003e\n\u003cp\u003eThe IS200TBAIH2C facilitates the physical connection layer for high-density analog input signals, supporting the deterministic data exchange required by Mark VI architecture. The card is engineered to provide low-impedance termination for process instrumentation, ensuring signal integrity from the field device to the I\/O module. It manages the routing of sensitive analog signals while minimizing noise coupling through effective grounding and shielding paths. Proper termination at this card is required to maintain the deterministic network velocity and signal accuracy needed for real-time monitoring of turbine process variables.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Is this terminal card compatible with 4-20 mA HART protocols?\u003c\/p\u003e\n\u003cp\u003eA: The IS200TBAIH2C is designed for standard analog signal termination; while it can pass HART signals, ensure that the connected I\/O module is specifically configured to support the protocol’s communication requirements.\u003c\/p\u003e\n\u003cp\u003eQ: Can this terminal card be replaced while the system is under live process conditions?\u003c\/p\u003e\n\u003cp\u003eA: No. Terminal cards must be de-energized and disconnected from field power before replacement to prevent electrical arcing and to protect the connected I\/O processor electronics from transients.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure all field-side power is isolated and locked out before beginning installation to prevent accidental contact with energized circuits.\u003c\/li\u003e\n\u003cli\u003eVerify that the terminal card is securely seated on the mounting rail or backplane chassis, utilizing all mechanical fastening points to resist vibration.\u003c\/li\u003e\n\u003cli\u003eRoute analog input wiring through dedicated conduit or cable trays, maintaining a minimum physical separation of 100 mm from high-voltage AC power cabling to minimize induced EMI.\u003c\/li\u003e\n\u003cli\u003ePerform a continuity check on all shield terminations to ensure a low-resistance path to the cabinet's common earth ground bus before system initialization.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52524712263992,"sku":"IS200TBAIH2C","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/IS200TBAIH1CDD2.jpg?v=1780560041","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-is200tbaih2c-analog-input-terminal-card","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}