{"product_id":"general-electric-ur-6bh-digital-i-o-module","title":"General Electric UR 6BH Digital I\/O Module","description":"\u003cp\u003eThe \u003cstrong\u003eGeneral Electric UR 6BH\u003c\/strong\u003e, also cataloged as the \u003cstrong\u003e6BH\u003c\/strong\u003e Digital I\/O card, operates as a dedicated hardware component for high-density discrete signal processing within Multilin Universal Relay (UR) platforms. This module provides the physical interface required for monitoring external status inputs and executing control outputs, serving as a critical link between field-level discrete devices and the relay's internal protection logic.\u003c\/p\u003e\n\u003ch3\u003eHardware Specifications\u003c\/h3\u003e\n\u003cfigure class=\"table\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eParameter\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eUR 6BH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eGeneral Electric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eUSA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e28 cm x 11.5 cm x 4.5 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temp\u003c\/td\u003e\n\u003ctd\u003eIndustrial standard environment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eDependent on I\/O load state\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Type\u003c\/td\u003e\n\u003ctd\u003eDigital I\/O Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSystem Platform\u003c\/td\u003e\n\u003ctd\u003eMultilin Universal Relay (UR)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eBackplane Bus Communication and Signal Conditioning\u003c\/h3\u003e\n\u003cp\u003eThe UR 6BH module integrates with the relay backplane bus to facilitate deterministic data transmission between field sensors and the central processor. The module utilizes high-speed bus interfaces to ensure that discrete signal changes are scanned and processed within the relay's predefined logic execution cycle. Firmware flash compatibility is governed by the host relay chassis version; installers must verify that the base unit software revision supports the 6BH module configuration to ensure correct I\/O mapping and diagnostic reporting.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: Does the UR 6BH support hot-swapping while the relay is energized?\u003c\/p\u003e\n\u003cp\u003eA: No. The UR 6BH is not designed for live insertion or removal. The relay must be fully de-energized to prevent electrical damage to the backplane pins and to ensure the stability of the relay's internal configuration during maintenance.\u003c\/p\u003e\n\u003cp\u003eQ: How should digital inputs be managed to ensure signal integrity?\u003c\/p\u003e\n\u003cp\u003eA: Digital inputs should be wired using shielded twisted-pair cables. Shields must be bonded to the relay chassis ground stud to mitigate electromagnetic interference, ensuring reliable state detection in high-voltage substation environments.\u003c\/p\u003e\n\u003ch3\u003eField Installation Guidelines\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eConfirm that the UR relay chassis is isolated from all power sources and that the workspace is clear of conductive debris.\u003c\/li\u003e\n\u003cli\u003eEnsure the designated slot in the relay chassis is clean and free of obstruction.\u003c\/li\u003e\n\u003cli\u003eAlign the UR 6BH module with the chassis slot guides and slide it into the relay until the rear-mounted backplane connectors are fully seated.\u003c\/li\u003e\n\u003cli\u003eSecure the module using the integrated front-panel locking screws to provide mechanical stability and ensure proper ground contact.\u003c\/li\u003e\n\u003cli\u003eTerminate all external discrete wiring to the designated terminal blocks, ensuring that insulation is stripped precisely to prevent exposed conductors.\u003c\/li\u003e\n\u003cli\u003eExecute a hardware self-test diagnostic via the relay front panel or EnerVista UR software to confirm the module is correctly identified and that all I\/O points are operational.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"GE FANUC","offers":[{"title":"Default Title","offer_id":52620244746552,"sku":"UR 6BH","price":220.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0893\/1616\/3896\/files\/UR6BH2.jpg?v=1783497528","url":"https:\/\/www.automodulexpert.com\/products\/general-electric-ur-6bh-digital-i-o-module","provider":"AutoModuleXpert Ltd.","version":"1.0","type":"link"}